Community Member Credit: Neo Raven456

Alright, so I know this isn’t a complicated procedure, but a lot of people like to know exactly what they’re getting into when they go to do a mod. I’m one of those people. I had found a tutorial before, but it seems it has gone offline or I can’t find it anymore. So I decided to take pictures and write one up while I did the mod myself.

Time: 5-10 min.

What you need:

  • Clear Bumper Lenses
  • Two 1156 Amber Bulbs
  • Two 194 Amber Bulbs

And these tools:

Step 1) Take off the outer light housing using the 1/4 Flathead Screwdriver wrapped in the cloth. Pry from the left side of the housing because the clip is on the right.

Step 2) Unscrew the one Phillips head screw holding the inner housing as seen in the above picture.

Step 3) Remove lights from housings, simply grab the Grey connector and twist, then remove.

*Note* Some states require amber bulbs (NJ does not) to be installed as well since our stock ones are clear, if this does not apply go to Step 4:

Step 3a) For the outer bulbs simply pull the bulb and it comes out

Step 3b) For the inner bulbs twist, then pull

Step 4) Reverse what you just did and your done!

Stock vs Clear

Final Product with clear bulbs

Final product with Ambers