Last Updated: 04/15/2021 @ 06:56 am
Community Member Credit: Jose Vargas
I35 Cluster swap in the process, first ima swap out the long led tub it has to light up gauges and replace it with 4 RGB led strips with the module so I can remotely change to different colors quickly if I want to. Everything PNP like OEM. I’ll post links to what I used to make it perfect…
Has 4 pnp leds that can easily be swapped and for warning indicators you need to unsolder old leds and put in new ones 14 is needed
For the Auto guys you can swap out the shift indicator leds……..3mm for warning indicators,so since the cover and holes for leds is big enough im a swap out the 3mm to 5mm to have it brighter
Without OEM led tube
With oem led tube that lights up entire cluster, so as you see you can run strips
You need 4 strips of these RGB leds
Female……Pigtail connector to make it pnp to module
Module with remote to change to multiple color
Male Power connector to make it pnp, run ground to chassis and power wire with mini add a circuit with 15A fuse to ACC in fuse box
I35 cluster 80% done installed the leds strips. Just waiting for module and pigtail to make it pnp……
Swapped out the 5 pnp leds
5mm to the left soldered in compared to the small 3mm to the top right
5mm vs 3mm
Removed SLIP led so it will not turn on LED213.
Had to dissamble the cluster to put black tape over the AUTO indicators
5MM led clearance
Pnp connector all wired up and ready. Nice and clean…Mr. DoITRightEveyTime.
Cluster is done and installed……mission was a success…..Repinned the plugs and rewrapped harness
1 done 2 plugs left
3 plugs all wrapped up
I35 Cluster & Prosport EVO series allows you to match up 4 different colors to cluster..