my7thgen 09-15 05/29/2023

2009-2015 7thgen Nissan Maxima Racingline Traction Rod Kit (Reference Info)

Traction Rods are used to absorb unwanted deflection in the OEM control arm. Largely do to the OEM’s rubber bushings, under hard acceleration the control arms natural motion of up and down can be compromised by the forces created as the axles try to turn the front wheels. This deflection is then translated in to things like wheel hop and under some circumstances, torque steer.

Price: $149.99
Part Number: TR-A35

Traction Rods help to ensure the correct suspension geometry under acceleration and stop the “toe-in/toe-out” condition created when the car is under load. This assists in power transmission to the ground and therefore faster acceleration in straight lines and coming out of corners in both wet and dry conditions. Some additional toe adjustment for front alignment may also be obtained.

Easily mounts to the car in less than one hour. Almost no ground clearance is lost during the installation of these Traction Rods. As measured on a vehicle lowered 2″, the lowest point of the kit is 1/4″ higher than the subframe and directly in line with the wheels center line so there is no risk of scraping the rod on a speed bump.

Perfect for any car that sees track duty, whether it be drag or autoX, the difference in feel and power transmission is felt immediately!

Optional Stainless steel joint are available to ensure long service life, especially for vehicles the see sno/salt

All hardware and instructions are included.

Keep Reading

my7thgen 09-15 05/28/2023

2009-2015 7thgen Nissan Maxima Racingline Grounding Kit (Install Info)

PDF Version: A35_ground_Install

Keep Reading

my7thgen 09-15 05/28/2023

2009-2015 7thgen Nissan Maxima Racingline Grounding Kit (Reference Info)

Specially selected ground points around the engine, alternator, intake manifold, and body are utilized to reduce resistance on the vehicles electrical system. By reducing the resistance and improving the flow of electricity, vehicle sensors will work more efficiently.

Price: $55.99

Benefits include:

better mileage
brighter lights
stabilized idle
no “dimming” of lights or rpm drops when using accessories
better throttle response
reduced engine noise in audio systems
better shifting on many automatics
Increased power in some applications

Specs:

Industry best tinned 2058 strand 4AWG wire, 100% oxygen free copper
Logo free wires
thick heavy duty tinned copper lugs
8 ground wires
picture instructions included
all wires labeled for easy reference

Available in Matte Blue or Matte Black. Red available by request(Made to order, add 2-3 days to order processing).

Installation Instructions

PDF Version: A35_ground_Install

Keep Reading

my7thgen 09-15 05/28/2023

2009-2015 7thgen Nissan Maxima Racingline Y-Pipe (Reference Info)

Specially made using full stainless steel construction, this ( patent pending) performance Y Pipe is dyno proven to see gains of 13hp and 14ft/lbs to the wheels on an otherwise stock vehicle!! By enlarging the primary runners and collector, removing a tight crimp in the factory piping and deleting the 3rd unmetered catalytic converter, lots of extra power is created.

Price: 295.99

Sound levels remain stock like during low rpm daily driving and highway cruising, but during spirited driving the cars sound does increase slightly to provide a more 350Z/370Z like tone

Although this pipe deletes 1 of the 3 stock catalytic converters, no SES/CEL lights are triggered. The catalytic converter being removed is not metered and the cars ECU does not realize it is missing.

This pipe is a complete bolt on replacement to the stock unit. No additional modifications are necessary and the car (in proper running condition) will still pass all known USA & Canada smog tests.

**Note** Because the is pipe deletes a catalytic converter, it is thus branded FOR OFF ROAD USE ONLY.

All hardware and gaskets are included.