Disclaimer: This external content was submitted by members of the Maxima community to help and educate others. If there are issues with this content and you would like to request removal, please visit our Legal Terms & Conditions page.

Side View

350Z on the right. Both are the same height.

Top View

350Z on the Bottom.

The next two pics are meant to show how much more of a straight thru shot that the flow path is in the 350Z LIM.

The first one is the FWD Maxima LIM

Notice how the 350Z path below is much straighter.

Notice on the 350Z port below there is a small machined step on the inboard lip. It only goes about halfway around the port circumference. It is on the wrong side of the port to prevent flow separation so there must be another reason.