Last Updated: 01/10/2021 @ 02:23 pm

Community Member Credit: Eddy

The fans on my 6thgen Maxima went bad, so I decided to try out these eBay ones before buying a more expensive brand again. At this price, I figured I could repurpose them for something else in the event my car was not cooling properly. I previously had a SPAL fan where the motor seized. To my surprise, these actually ended up working great with no issues. While a shroud is recommended, I don’t have one and my car didn’t have any issues with cooling during the summer. I have an external water temp gauge and temps are as they normally should be.

So if you’re looking for a Mishimoto alternative or OEM stock fan replacement, you can give these a try. And quite honestly, I saw no difference between these and a set a Mishimoto fans that I have on another car. I have these wired up directly to stock harness used a 4thgen Maxima pigtail. No external relay was required for these.

Description: 2×14”inch Slim Fan Push Pull Engine Radiator Cooling 90W Mount Kit Universal
Price: $32 Shipped (for both fans)
Order Link: https://www.ebay.com/itm/192031451879

Details:

  • Diameter: 14 inches (Blade to Blade)
  • Thickness: 2.56 inches
  • Watts: 90W
  • CFM (Cubic Feet per Minute): 2550 cfm
  • RPM (Maximum Fan Revolution(s) Per Minute ): 2250 rpm
  • Number of Blades: 8 pcs
  • Color : Black

Package Included:

  • 2x 14” Black Electric Radiator Cooling Fan
  • 2x Mount Hardware Kit
  • 2x Installation instruction

Mishimoto Comparison

PRODUCT SPECS

TYPE OF ENDSFemale Snap-Plug Terminal
MATERIALPlastic
AIR TEMP WHILE TESTED72°F (22°C)
NORMAL CURRENT (AMPS)7.8
VOLTS12
HOUSING DIAMETER14.75″
OVERALL THICKNESS2.5″
REVERSETrue
BLADE STYLECurved
INRUSH CURRENT (AMPS)15.1
# OF BLADES8
FAN RPM2200
FAN DIAMETER14″
OVERALL DEPTH2.67″
CFM1300