Last Updated: 09/08/2025 @ 06:27 am
Community Member Credit: Nels N.
Finally decided to replace my main ground for the battery relocation. It was originally under the mount bracket for the scissor jack in that little pocket, but with mega shitty crimp terminals and basically to body sheet metal.
Started by popping off that little cap to reveal the bolt to the bumper support. Removed the bolt to find the tacked in nut no longer attached and the threads on nut and bolt are both just mangled to hell… Went to Lowes and ended up with a 6 inch 3/8-16 threaded rod and various nuts and washers. Have a nylock nut underneath, then a flanged lock nut to sandwich that. Drilled a hole in the cap to seal it back up, then ran down another nylock nut and sandwiched the new KnuKoncepts terminal. Cut off about 2″ of excess threads and she’s good to go! (Need to get one of those battery terminal covers).
I’ll slowly but surely redo the others and add grounds in the front!
Comments are closed.