Last Updated: 12/11/2023 @ 06:48 pm

Credit: Jiancarlo Smith

I’ve created a write-up for installing the driver’s side mirror, using a different diagram. Included are photos and a spreadsheet documenting the process. The mirrors are from a 2010 Altima. I chose to route the signal wires to the trunk for convenience and easier concealment, despite other possible routes.

Please note: If you’re not confident in drilling or wiring, it’s advisable to seek help from someone experienced. I hope this information is useful.


  • 10MM
  • Screwdriver (Phillips/Flat-Head)
  • Electrical Test Pen or Multi-meter
  • Electrical Tape/Heat Shrink/Wire Nuts
  • Drill or Dremel
  • Paint Marker
  • Wire for Signals
  • Wire Stripper
  • Mirrors (Left and Right)


Comments are closed.