Credit: roro

I decided to just compile a thread listing all part numbers that have been frequently requested. This will answer everyone’s questions about what exactly is needed to do everything right and hopefully eliminate any confusion or trial and error.

SER Tail Lights

• 26555ZB725 – left
• 26550ZB725 – right

SER Front Bumper

• 62022ZB700 – front bumper
• 62084ZB700 – lower grille
• 62256ZB700, 62257ZB700 – fog finishers
• 26155ZB725, 26150ZB725 – projector fog lights
• 085666205A – screws for new fogs; you will need 4 (2/side)
• 089671065A – nuts/clips for fogs; also need 4
• 62090ZB700 – foam absorber; NOT needed (you can just remove the old one)
• 63842ZB700, 63843ZB700 – wheel wells (aka fender liners); these are highly recommended! the stock wheel wells will not fit / match up with the SER bumper
• 75890ZB700 – engine undercover; also highly recommended. the stock one will not reach the SER bumper. you could always go w/o it but who knows what could splash up there.

SER Suspension

• 562307Y007 – rear sway bar (27mm)
• 546137Y011 – rear bushings; you will need 2 of these to fit the thicker RSB
• 562347Y001, 562337Y001 – rear brackets; you need these with the RSB
• 54611ZB700 – front sway bar (24mm)
• 54613ZB700 – front bushings; need 2 with FSB
• 54303ZB725 – front strut, left
• 54302ZB725 – front strut, right
• 56210ZB725 – rear shocks (you need 2 obviously)

Nissan FSM recommends replacing these nuts and bolts for the front struts every time (e.g. during a spring installation)

• 012230004U – (4) lower mounting nuts, 93-114lbs
• 54588AD002 – (2) connecting rod bolts, 59-72lbs
• 0122300301 – (2) piston rod lock, 44-65lbs

SER Spoiler

• 96030ZB710 – lip spoiler; comes unpainted!

NISMO

• 13020RNZ35 – VQ35 cams
• 20100RNL10 – 3.5 catback
• 5300SRSL10 – suspension, front
• 5621SRSL10 – suspension, rear
• 54600RSL10 – sway bars (but you might as well get the SER parts since they are the same and cheaper)