Member Credit: Matty

Note: You can order directly from Matty at Jeepman17@aol.com. He’s usually responds fairly quickly. We recently purchased from supercharger replacement bolts in 2018.

As you know Stillen has discontinued the Supercharger kit for the 95-01 Nissan Maxima. The only real way to get a Supercharger kit for your maxima is to buy it used, or build your own kit. Well finding a plate that works with the Vortech blower is kind of tough…

For the past few months I have been gauging interest on a plate kit that is an Exact Replica of the 9 year old V1 Plate that Stillen Produced. This plate is notorious for being Really Reliable, unlike the common V2 Kits that have melting pulley’s and Shredding Belt Problems. The V2 Plates are made of Aluminum and when exposed to heat, it tends to shift a tad bit while boosting. While the plate is slowly moving away from the motor, that crucial belt alignment, that you spent hours getting perfect with shims and washers (on the V2 kit only), tends to get out of wack and shredding your belt is very common.

The major advantage in buying the kit directly from me is that you will have a Super Reliable Supercharger Kit, NO shredding Belt Issues, and the Major advantage is that you can build a kit on a budget. Spending $3500 from Stillen was never fun. With this kit, you can have a Full Kit, the way you like it, for less then $2500…

The Plate Kits are professional made by a CNC Machinist. They are an exact replica of the 12 year old V1 Kit that was sold by Stillen.

V1 Full Starter Kit
Price: $1620 + Shipping and PayPal fees (+$150 Optional Nickle Coating):

  • V1 Steel Plate
  • Modified Aluminum Thermostat Housing (Welded and Pressure Tested)
  • NEW Nissan Thermostat
  • NEW Nissan Thermostat Gasket
  • Fenner Drive Idler Pulley (Rare pulley, Stillen used these)
  • Pulley Bearing Spacer
  • Idler Pulley Bolt
  • All Bolts Needed (Plate to Blower and Plate to Engine)
  • Nissan Modified Drain Back Housing

V1 Conversion Kit  (Converting From V2 To V1 Due to Belt Shredding Issues)
Price: $1225 + Shipping and PayPal fees (+$150 Optional Nickle Coating):

  • V1 Steel Plate
  • Modified Aluminum Thermostat Housing (Welded and Pressure Tested)
  • NEW Nissan Thermostat
  • NEW Nissan Thermostat Gasket
  • Fenner Drive Idler Pulley (Rare pulley, Stillen used these)
  • Pulley Bearing Spacer
  • M8X40mm Alternator Bolt
  • Idler Pulley Bolt

Note: STILLEN used to sell JUST the V2 plate for $1025 + shipping and $825 with a discount…and that was for the V2 plate ALONE.

Building Your Own Kit:

Here is a list of What you will need, besides my V1 Starter Kit above:

Feed line, Rubber Drain Line, Fittings + Couplings, Rubber Power steering lines (Any Auto Parts Store), Vortech V1 or V2 Blower (Counter Clockwise Rotation, Straight Discharge), Charge Pipe 3″ or 2.5″, FMU (Vortech or Cartech), Fuel pump (Walbro In-tank), BOV (any type you want). All these can be had for < $1200 including blower

Complete Parts List and Prices: https://www.my4dsc.com/mattys-vortech-v1-v2-supercharger-parts-list/ 

views
1