Search Results for: z32 brake calipers

Results 1 - 30 of 150Page 1 of 5
Results per-page: 10 | 20 | 50 | 100

Information on Upgrading Your 5thgen Maxima Brakes to 6thgen Nissan Maxima

Relevance: 86%      Posted on: 04/06/2021

Information on Upgrading Your 5thgen Maxima Brakes to 6thgen Nissan Maxima

Community Member Credit: LA02MAX Ok, so since this is something that's becoming ever more popular, I decided to compile all of the information you need to upgrade the front brakes on your 5th gen to the 6th gen brakes with 12.6" rotors... First check your wheel clearance to make sure…

Akebono Brake Upgrade Buying Guide for 7thgen Maxima

Relevance: 82%      Posted on: 12/28/2017

Akebono Brake Upgrade Buying Guide for 7thgen Maxima

Member Credit: Joshua Wright Here I will outline everything you will need to purchase to successfully install the Akebono brakes/calipers on our 7thgen Maxima. First (Acquisition of Calipers): Obviously, you will need to get you a set of Akebono calipers. You can get any of them from the following vehicles since…

How to Rebuild your Brembo Calipers (Seals and Dust Boot)

Relevance: 77%      Posted on: 12/29/2017

How to Rebuild your Brembo Calipers (Seals and Dust Boot)

Member Credit: lsmooth81 I purchased some use Brembo brakes and had them PC red, I did not know any better and send them to get PC without removing the seals and piston. If I could do it again I would definitely remove everything before getting them PC. I could not find a DIY on G35driver…

Akebono Caliper Specs & Weight (Nissan and Infiniti)

Relevance: 72%      Posted on: 07/08/2018

Akebono Caliper Specs & Weight (Nissan and Infiniti)

Member Credit: Twin001 Both the Nissan 370Z and the Infiniti G37 calipers are the same size, simply done in different colors respectively.  They both will interchange 100% with each other, and all hardware remains the same for both calipers.   Size: Front caliper: 4-pot Rear caliper: 2-pot Front rotor: 355mm /…

300ZX Twin Turbo BBK Z32 on 6thgen Maxima

Relevance: 71%      Posted on: 12/24/2017

300ZX Twin Turbo BBK Z32 on 6thgen Maxima

Member Credit: EddyMaxx For your 6thgen's you need either the 30MM Aluminum or 30MM Iron Z32 Calipers for proper fitment. They are 4-Piston calipers. You will also need the brackets for them. You can usually find the calipers on eBay for good pricing. I would say approx. $200-$250 for a…

7thgen Maxima with Front Autozone Akebono BBK Installed ($300 Bucks)

Relevance: 70%      Posted on: 02/24/2018

7thgen Maxima with Front Autozone Akebono BBK Installed ($300 Bucks)

Member Credit: EddyMaxx & Michael Bird Tindal Thanks to Michael for posting this information. For approx. $300 bucks, you can have a front Akebono BBK on your 7thgen Maxima. This is for only the Front BBK ONLY. You can do the rear setup as well inexpensively. This is applicable to other…

300ZX Z32 Caliper Setup Options for 5thgen Nissan Maxima

Relevance: 70%      Posted on: 09/22/2020

300ZX Z32 Caliper Setup Options for 5thgen Nissan Maxima

Blehmco Kit: Z32 Calipers 2004 6thgen Maxima Rotors Relocation brackets Conversion Lines Jeff92se Kit: z32 calipers Cobra rotors relocation brackets center rings conversion lines Z32 Direct Rotor Swap: Z32 calipers Z32 rotors (must be milled down) conversion lines. Additional Info: You have to mill down the diameter of the rotor,…

Full Z32 300ZX BBK Installed on 5thgen Nissan Maxima

Relevance: 69%      Posted on: 09/22/2020

Full Z32 300ZX BBK Installed on 5thgen Nissan Maxima

Community Member Credit: WildmanAL This setup uses the Blemhco Front and Rear Adapter Kit (which is no longer available). You can learn more about it here: https://www.my4dsc.com/blehmco-maxima-big-brake-kits/ As for stopping power, it's a hell of a lot better than stock. It's a lot smoother and you can actually feel the…

6thgen BBK (Better Brake Kit) Installation on 5thgen Maxima

Relevance: 67%      Posted on: 11/03/2018

6thgen BBK (Better Brake Kit) Installation on 5thgen Maxima

Member Credit: godlyone Parts: Calipers + torque member from a 2004 maxima through a junkyard ($50) Black Zinc coated Dimpled Rotors + Hawk HPS pads via rotorpros ($149) Total of 200 spent The first step is to really clean the calipers.. they were filthy! Before: After: Then sand the hell out…

BlehmCo Maxima Big Brake Kits

Relevance: 67%      Posted on: 01/13/2018

BlehmCo Maxima Big Brake Kits

Member Credit: Matt Blehm Please note that this post is for reference and documentation purposes ONLY. Matt Blehm no longer offers these products or services. Products were available from 2003 to around 2009. BlehmCo Maxima Big Brake Kits Front Big Brake Kit #1--2004 Maxima Rotors with 300ZX calipers: This kit fits…

Akebono Big Brake Kit / Mitsubishi Evo X GSR Rotor Upgrade Alternative

Relevance: 64%      Posted on: 10/31/2018

Akebono Big Brake Kit / Mitsubishi Evo X GSR Rotor Upgrade Alternative

Member Credit: Nperez1986 /  Jonthon Rubia If you are looking to upgrade to the Akebono 4-Piston BBK from a Nissan 370z / Infiniti G37 Sport, you now have the option to use 300ZX (Z32) caliper adapter brackets on eBay. The bracket themselves are $70 bucks shipped. In order for this to work,…

How to Install 2002-2003 5thgen Brakes on 4thgen Maxima

Relevance: 64%      Posted on: 12/25/2018

How to Install 2002-2003 5thgen Brakes on 4thgen Maxima

Member Credit: 95BLKMAX I wanted bigger brakes, but I didnt want to spend a fortune (as much as one would spend, say for a Z32 upgrade, or the 6th gen rotors with Z32 calipers, etc...) for just front brakes. Plus I dont autoX, I just do alot of highway spirited driving;…

Autosports Engineering vs eBay 300zx Caliper Adapters for Akebono Calipers

Relevance: 62%      Posted on: 06/14/2020

Autosports Engineering vs eBay 300zx Caliper Adapters for Akebono Calipers

Credit: Jose R Garcia Colon & Robert Mandru UPDATE from Robert Mandru: Have both the 300zx and 350z bracket adapters. They will NOT clear with Evo X 2 piece rotors, maybe just 1 piece. Even with one piece it still wouldn't clear the inside, rotor too large with the 350z/G35…

5thgen Nissan Maxima with EVO 8/9 Brembo BBK & 13″ Cobra Rotors

Relevance: 59%      Posted on: 07/12/2020

5thgen Nissan Maxima with EVO 8/9 Brembo BBK & 13" Cobra Rotors

Credit: Daniel Duran This is a 5thgen Nissan Maxima with EVO 8/9 Brembo calipers and Cobra Rotors. Setup Details: 2003 Evo 8 4-Piston Brembo Calipers. Most members find these used on eBay or local junkyard. You need Hub Centric Rings for this to work. They need to have an inner…

2009-2015 7thgen Nissan Maxima with 370z/G37 Akebono Big Brake Kit Setup

Relevance: 59%      Posted on: 08/14/2020

2009-2015 7thgen Nissan Maxima with 370z/G37 Akebono Big Brake Kit Setup

Credit: Candelario Amaya Calipers Order Link ($415.00): https://www.ebay.com/itm/4x-Brake-Caliper-for-Nissan-370Z-Infiniti-FX50-G37-M37-Front-Rear-Left-Right/174339706919 Rotors/Pads Order Link ($469.00): http://www.88rotors.com/brakes/platinum-series-brake-kits-1/370zakebono-bpsstoptech.html?fbclid=IwAR3C-8-ynxEY7BD71koGwi_tMoisCEjcAZf1-MWonoHJIjpSryJa5iqPJSM Setup Photos    

Mitsubishi EVO 8/9 Brembo BBK Installed on 2002 5thgen Maxima

Relevance: 58%      Posted on: 05/12/2019

Mitsubishi EVO 8/9 Brembo BBK Installed on 2002 5thgen Maxima

Member Credit: EddyMaxx Decided to install my Evo 9 Brembo BBK today on my 2002 Nissan Maxima. It cost me around $500 bucks to do the full setup. The brackets fit great and have full rotor-to-pad coverage. Part's Used: 2003-2007 Mitsubishi Evolution 8 / 9 Brembo Front Brake Calipers Part…

Stainless Steel Brake Lines for 1999-2003 Nissan Maxima (4thgen/5thgen)

Relevance: 57%      Posted on: 08/01/2020

Stainless Steel Brake Lines for 1999-2003 Nissan Maxima (4thgen/5thgen)

Credit: EddyMaxx My rear brake line on 4thgen Nissan Maxima had a pinch in it and caused a brake fluid leak. I was going to replace it with another stock line but ended up ordering stainless steel brake lines from eBay. You get all 4 brake lines shipped for $67…

6thgen Maxima Brake Swap into 4thgen Maxima on 16″ Wheels

Relevance: 55%      Posted on: 10/21/2020

6thgen Maxima Brake Swap into 4thgen Maxima on 16" Wheels

Community Member Credit: vipervadim Another Project from 2014 6gen brakes swap into 4th gen Maxima that clear 16in rims I've seen plenty of 6th gen brake swaps into 4th/5th gens but I've never seen them modified to clear 16in rims. I have 16s, spring and stuts, I plow through potholes…

How to Bleed your Maxima Brakes

Relevance: 52%      Posted on: 01/21/2017

How to Bleed your Maxima Brakes

Member Credit: shift_ice Over time the brake system can take on air as the effectiveness of the brake fluid decreases with age. Air can also enter the system from a leaky brake hose, a bad connection on the brake caliper, during any maintenance when a brake line is removed, or…

2004-2008 Nissan Maxima Blown Alternator Fuse Causing Brake/Battery Light

Relevance: 52%      Posted on: 11/17/2018

2004-2008 Nissan Maxima Blown Alternator Fuse Causing Brake/Battery Light

Member Credit: EddyMaxx I had recently encountered a Brake/Battery Light. The alternator checked out OK and car was driving well. After a little research, I discovered that the 10A Alternator Fuse located in the engine bay (picture below) was blown. Once I replaced it, both the Battery and Brake Light went…

How to Install Akebono BBK on Maxima

Relevance: 51%      Posted on: 12/29/2017

How to Install Akebono BBK on Maxima

Member Credit: twin001 This write-up is for a 2003/2004. But the same steps are application to 6thgen Maxima. Also, for 7thgens you do not need brackets but the installation instructions still hold. This DIY will take you through the basic steps to remove the existing brake components (calipers, rotors, lines) in…

Akebono 370Z Big Brake Kit Installation on 7thgen Maxima

Relevance: 51%      Posted on: 02/01/2018

Akebono 370Z Big Brake Kit Installation on 7thgen Maxima

Member Credit: MaximaDrvr aka Daryl Johnson It was just under $1,800 shipped for the kit. Shipping was included at $125. The options were: Slotted Rrotors Banjo Bolts Red Calipers Standard Ceramic Brake Pads If you attempt this yourself, you assume that you have some mechanical aptitude, and already know how to…

How to Install GS-100A Flashing Brake Module on 5thgen Maxima

Relevance: 51%      Posted on: 02/08/2018

How to Install GS-100A Flashing Brake Module on 5thgen Maxima

Member Credit: Lincoln Mitch This how-to will walk you through installing a GS-100A flashing brake module on your 5thgen Maxima. You can buy them in different configurations depending how quick you want the module to flash. You will need 1 module for each taillight (they are usually sold in pairs).  Model…

Installing a Stillen Rear Sway Bar (RSB) on 5thgen Maxima

Relevance: 48%      Posted on: 12/25/2017

Installing a Stillen Rear Sway Bar (RSB) on 5thgen Maxima

Member Credit: Greg I took the Stillen Rear Sway Bar (RSB) off my '99 Maxima before trading the car in and couldn't wait to reinstall it on my 2002. I ordered new brackets from Stillen, because the trailing arms on the 2002 Maxima are much wider than the ones on…