Search Results for: radiator support

Results 1 - 30 of 102Page 1 of 4
Results per-page: 10 | 20 | 50 | 100

The 4thgen Maxima Definitive Radiator Core Support Thread

Relevance: 100%      Posted on: 04/21/2018

The 4thgen Maxima Definitive Radiator Core Support Thread

Community Member Credit: Brad Connor As many of you may know the radiator core support is a known "weak point" on the A32 chassis. This is an extremely common issue among A32's from "wet" states. This thread will address a number of key points with these issues Signs of a…

Cheap 4thgen Nissan Maxima Radiator Support Repair $25 Bucks

Relevance: 82%      Posted on: 12/16/2018

Cheap 4thgen Nissan Maxima Radiator Support Repair $25 Bucks

Member Credit: Bryan & Kelsey In this episode, we repair a very common problem found in the 4th and 5th generation Maximas. Rusted of radiator supports. The radiator support on these cars is extra important because it also holds up the motor.

2002 Infiniti I35 with 2002 Nissan Maxima Front End Conversion

Relevance: 56%      Posted on: 12/27/2020

2002 Infiniti I35 with 2002 Nissan Maxima Front End Conversion

Community Member Credit: Hdnseek Back story behind the car, I bought it in March with damage to the front end. It had sat for 8 months at a apartment complex after the owner moved away. I drove it around a few days and fixed the coolant leak from the water…

How to Replace Thermostat on 4thgen Maxima

Relevance: 44%      Posted on: 01/23/2018

How to Replace Thermostat on 4thgen Maxima

Member Credit: VQpower The thermostat regulates the flow of coolant within the engine. At low coolant temps, it stays closed. As the engine warms, it opens to allow coolant to flow through the radiator and cool the engine. It's located on the left side of the engine, here: If it…

5thgen Nissan Maxima Aluminum Radiator Upgrade (using 4thgen Radiator $100 Bucks)

Relevance: 34%      Posted on: 10/13/2020

5thgen Nissan Maxima Aluminum Radiator Upgrade (using 4thgen Radiator $100 Bucks)

Community Member Credit: Eddy If you are tired of your OEM plastic radiator cracking or just simply looking for an upgrade, the 4thgen radiator is a very good option. It fits perfectly on the 2000-2003 5thgen and only costs around $100 bucks. The quality is great and equal to those…

How to Install Hella Triple Air Horns on 4thgen Nissan Maxima

Relevance: 33%      Posted on: 05/08/2021

How to Install Hella Triple Air Horns on 4thgen Nissan Maxima

Community Member Credit: Jeff Ketch Installation was actually rather simple but did require some fabrication to get everything hooked up and working. Only a short piece of 3/4" by 1/8" steel and some aluminum angle were needed for mounting everything. However, understand that horn kits don't ship with wiring or…

my5thgen.org FB Group Active Members 2018

Relevance: 29%      Posted on: 01/07/2018

my5thgen.org FB Group Active Members 2018

These are all of the active members on the my5thgen.org Facebook Group as of January 2018. This is includes maximas, non-maximas and other members who just want to view and show support. Thank you all!

Where are Bank 1 and Bank 2 sensors located?

Relevance: 23%      Posted on: 11/10/2017

Where are Bank 1 and Bank 2 sensors located?

So you get your code scanner and it says something like, "Bank 1 Sensor 2". So where exactly are these banks located? Bank 1 means that the sensor is closest to the Firewall. Bank 2 means that the sensor is closest to the Radiator. Yup, it's that simple.

Repairing Broken Exhaust Manifold Studs on 3rd Maxima

Relevance: 23%      Posted on: 01/14/2018

Repairing Broken Exhaust Manifold Studs on 3rd Maxima

Member Credit: Bryan Tisch I was successful in repairing my broken exhaust manifold studs. Below is my exact procedure I used. I took some video and some pictures, which I will post also. Half of the time for this procedure will be spent in removing the components in order to get…

5thgen Nissan Maxima Thermostat Replacement How-to

Relevance: 23%      Posted on: 06/02/2020

5thgen Nissan Maxima Thermostat Replacement How-to

Member Credit: maximaboy12 Hey Guys since I have not seen a thread like this and thought maybe some nOObs will like to have something like this. This fix is not hard be prepared to get dirty. Tools Needed: Small Ratchet set with a swivel head. (Preferably) 10mm Pan or something…

carsnwomen91’s Gen2 VQ35DE HR Swap How-to YouTube Video’s

Relevance: 21%      Posted on: 06/23/2020

carsnwomen91's Gen2 VQ35DE HR Swap How-to YouTube Video's

Credit: Rene aka https://www.youtube.com/user/carsnwomen91 Please subscribe to show them support! Part 1 - Introduction https://www.youtube.com/watch?v=LIBEMiUmcYk Part 2 - Inspecting and Opening the Motor https://www.youtube.com/watch?v=UCl_nSafhVk Part 3 - Timing Chain Assembly https://www.youtube.com/watch?v=xoljm21mltQ Part 4 - Cam Trigger Wheels https://www.youtube.com/watch?v=oEnqAsZ9HHM Part 5 - Trans Swap, First Start-Up https://www.youtube.com/watch?v=4kGXUOLpJBg

secondtonone317’s Backyard Turbo Rebuild

Relevance: 21%      Posted on: 01/01/2018

secondtonone317's Backyard Turbo Rebuild

Member Credit: secondtonone317 (R.I.P) This build was completed in July of 2009 by Bishnu. May he sleep in peace. Well, I been busy and didn't have time to drop this motor back in the car until. I have been working on it for the past month or so. Most of the…

How to Make a Flip Flop Trunk on Nissan Maxima

Relevance: 21%      Posted on: 07/07/2018

How to Make a Flip Flop Trunk on Nissan Maxima

Member Credit: Jason Sadler You need 10mm socket, metal drill bit set with a good drill, self tapping screws, 2 hinges, 2 latches, and a friend to help you out when you get tired of drilling or holding the trunk lid up on your back...and yes you need the winnie the…

How to Install Altima SE-R Front Sway Bar

Relevance: 21%      Posted on: 01/08/2017

How to Install Altima SE-R Front Sway Bar

Member Credit: DeusExMaxima Well, after all the trials and tribulations of installing a part never installed before, I'm finally finished. I took the car for a test drive. Clearly, the car does not lean at all. VERY flat handling, and very nice tracking through a turn. I like the tighter feel…

How to Install Transmission Cooler

Relevance: 19%      Posted on: 01/15/2017

How to Install Transmission Cooler

Member Credit: Greg 1.I bought the Hayden model 404 from Pep Boys for $49.99 plus tax. There were other smaller models, but I figured I would get the largest one practical. The 404 is considered "Heavy Duty" and is 7.5 inches tall by 15.5 inches wide, by 0.75 inches thick.…

How to install a CVT Transmission Cooler on 7thgen Maxima

Relevance: 19%      Posted on: 12/28/2017

How to install a CVT Transmission Cooler on 7thgen Maxima

Member Credit: Brandan Nankoo, Mishimoto Photo Credits: Sunday Ortiz and Gerson Flores No one ever wants to experience the feeling of having to replace a CVT Transmission. Under warranty, it's not so bad. But out of warranty, it will be a very expensive job. To prolong the life of the CVT, many…

Engine Coolant Removal and Replacement on 4thgen Maxima

Relevance: 18%      Posted on: 01/01/2018

Engine Coolant Removal and Replacement on 4thgen Maxima

Member Credit: motorvate Changing your coolant on a regular basis is very important to the longevity of your engine. With normal use, the corrosion inhibitors loose their effectiveness. Nissan recommends that AFTER the first 96,000 KM replace the coolant every 24 months, or 48,000 KM. The procedure that I am…

How to Replace your Oil Cooler Ring

Relevance: 18%      Posted on: 01/05/2017

How to Replace your Oil Cooler Ring

Member Credit: KZ 259 1. Drain out oil and coolant. drain the coolant as much as possible because it will drip for a while after the majority is out. 2. Remove oil filter 3. Take a 22mm socket and break loose the nut/bolt (its a bolt with a hex on it)…

Jeremy’s 757WHP Turbo 5.5 Gen Nissan Maxima (Part 2)

Relevance: 17%      Posted on: 01/19/2019

Jeremy's 757WHP Turbo 5.5 Gen Nissan Maxima (Part 2)

Owner: Jeremy M. View Original Feature --> Part 1 Year: 2003 Model: Maxima Color: Gray Metallic (KV3 ) Transmission: Manual 6 Speed Trim: GLE Highlights:  Made 757 WHP / 500+ TQ on January 18th, 2019. 757 WHP Dyno Video Full Mod List / Specs: Stock block 30 over bore size 8.8:5…

How to Install Progress Springs

Relevance: 17%      Posted on: 01/08/2017

How to Install Progress Springs

Member Credit: Scrambler68 Note: Dealing with suspension components are very dangerous, please use cautious when handling a loaded spring as harm may occur. 1. Jack up the vehicle and support with jack stands. 2. Remove the front wheels and you will see this: 3. Remove the sway bar end link…

1997 Infiniti i30 Automatic to 5-Speed Manual Transmission Swap

Relevance: 17%      Posted on: 02/22/2021

1997 Infiniti i30 Automatic to 5-Speed Manual Transmission Swap

Community Member Credit: i30ds I took my time and saved a bunch of cash for a host goodies. Best ball park guess (includes shipping) $3500... This included a lot of new stuff: Just about the only thing that were used are the shift and control rods, the clutch and brake…

In Loving Memory of Chris Hernandez aka Chernmax (The World’s First Turbo 6GM)

Relevance: 16%      Posted on: 02/04/2018

In Loving Memory of Chris Hernandez aka Chernmax (The World's First Turbo 6GM)

This post is dedicated to our good friend and fellow car cnthusiast Chris Hernandez aka Chernmax. He was a true pioneer in the Nissan Maxima community and never hesitated to help a fellow member out. Chris was the first to turbo a 6thgen Nissan Maxima and inspired many others to…