Search Results for: cam sensor bank 2

Results 1 - 30 of 81Page 1 of 3
Results per-page: 10 | 20 | 50 | 100

Where are Bank 1 and Bank 2 sensors located?

Relevance: 100%      Posted on: 11/10/2017

So you get your code scanner and it says something like, "Bank 1 Sensor 2". So where exactly are these banks located? Bank 1 means that the sensor is closest to the Firewall. Bank 2 means that the sensor is closest to the Radiator. Yup, it's that simple.

How to Install O2 Simulators on Nissan Maxima

Relevance: 44%      Posted on: 01/01/2018

Member Credit: Puppetmaster This should work on all Cali spec Maximas. When dealing with codes P0420 and P0430, whether its voluntary removal of or just bad pre-cats, the O2 sim helps keep your SES/CEL/MIL light off and typically also prevents the ECU from storing any related codes. Rear 02 sensors…

How to Replace and Install New 02 Sensors

Relevance: 44%      Posted on: 01/05/2017

Member Credit: Scrambler My SES light came on the other day and the code is indicating O2 sensor Bank 1, Sensor 1. That is the bank that is on the back side of the engine, against the firewall. Sensor 1 is the sensor in the exhaust manifold before the cat. BTW...…

How to Install Y-Pipe & Catalytic Convert on 5thgen Maxima

Relevance: 40%      Posted on: 01/14/2018

Member Credit:  beancooker 1. Remove all heat shields (10mm wrench). 2. Remove O2 sensors. 3.Spray penetrating oil on all bolts to be taken out. YOU WILL NEED A PIVOTING ADAPTER FOR YOUR SOCKET WRENCH. Remove 3 bolts on front bank, 3 bolts on rear bank and 2 bolts on cat.…

2004 Nissan Maxima P0335 Trouble Code (Crankshaft Position Sensor)

Relevance: 36%      Posted on: 06/04/2018

Member Credit: EddyMaxx I was getting the following code: P0335 Crankshaft Position Sensor A Circuit Malfunction  This code was causing my car to go into "limp mode" and wouldn't go over 3500 RPM. Also, don't confuse this sensor with the Camshaft Position Sensor. The sensor is very easy to change. All…

How to Replace Knock Sensor on 4thgen Maxima (P0325)

Relevance: 34%      Posted on: 02/10/2018

Member Credit: Sparky Code P0325 stored in 1997 Nissan Maxima. Because the knock sensor is normally at fault I usually test it first. The knock sensor is located under the intake and is accessible on the driver’sside of the car. Locate the knock sensor subharness connector. It is near the…

Swap 1995-2003 Mass Airflow Sensor to Newer Style Maxima (2004+)

Relevance: 30%      Posted on: 09/22/2019

Member Credit: Jonathan Martinez This will allow you to add a new style maxima (2004+) Mass Airflow Sensor to your 1995-2003 Nissan Maxima. For example, the newer MAF sensor is pretty much the same as 90% of the newer Nissan Models. Much cheaper and easier to find. You just need…

Nissan Maxima / Infiniti i35 P0720 or P1574 Check Engine Code

Relevance: 30%      Posted on: 07/07/2018

Credit: Best PC Reviews If you have been driving on interstate for couple hours and then notice your transmission fails to switch a gear or if you got codes like P0720 or P1574, this article may be for you. Read full article. As I mentioned before, if you have been driving…

Are You Noticing Lack of Power Between 0-40 MPH?

Relevance: 29%      Posted on: 02/06/2017

Member Credit: EddyMaxx & Tom Brooks. Are you noticing a lack of power when accelerating between 0-40 MPH? Is your car fine once you get passed 40 MPH? Did you scan for codes and nothing? Do you have a CVT? If you answered YES to the questions above, then you…

O2 Simulator Installation (Original Instructions Provided for Cattman Headers)

Relevance: 28%      Posted on: 12/23/2018

Download PDF **All connections should be soldered and insulated with electrical tape or heat-shrinking tubing.** 1.  Find your secondary O2 sensor(s). 2. Establish which O2 sensor wires are Signal, +12 and Ground. Either use the bottom of this page for color codes of most factory oxygen sensors or use a…

Changing Oil Sending Unit on Altima SE-R

Relevance: 28%      Posted on: 05/24/2018

Member Credit: VQpwrdSE-R So I finally buckled down and added info in here for how to change your oil sending unit also known as an oil pressure sensor. Hoping this helps some of you guys out. The beginning of my problems was when I noted 0 psi on my oil pressure…

P0075 211; Intake Valve Control Solenoid Circuit (Bank 1) 2009 Maxima

Relevance: 25%      Posted on: 09/02/2019

Member Credit: EddyMaxx Our 2009 7thgen Nissan Maxima threw code P0075 - Intake Valve Control Solenoid Circuit (Bank 1). Bank 1 is the location closest to the Firewall. The first thing to always do is to check the connectors and harness to see if it's broken or has any exposed…

2004 Nissan Maxima P0720, P1574 4-Speed Automatic

Relevance: 24%      Posted on: 06/03/2018

Member Credit: EddyMaxx I was getting the following codes together, P0720 and P1574 on my 2004 Nissan Maxima which has a 4-Speed Automatic Transmission. My Symptoms: RPM gauges would stop working intermittently Speedometer would flicker from time to time My cruise control lights were flashing (when pressing cruise control) Code…

SLO Muffler Factory Y-Pipe Installation on 3rd Gen Maxima

Relevance: 23%      Posted on: 01/14/2018

Member Credit: Matt York I just had the y-pipe installed today (5/2/98), so I have not been able to completely test it out, but my overall impression is very positive. The installation took 2.5 hours (cusom design/install) and involved the cutting and re-welding of several components of the exhaust system. The…

How to Clean Mass Air Flow (MAF) Sensor Under $10

Relevance: 21%      Posted on: 12/23/2017

Member Credit: Jasonmax I've seen a lot of people asking about how to clean the MAF, so I decide to do my own and show it to them. Things you need during the cleaning: CRC MAF cleaner Torx screwderiver #15 10mm wrenchPreparation: Park your car under a shade or a…

VQ35 FWD HR 2007+ Altima Engine Swap on 3.0 Timing

Relevance: 21%      Posted on: 10/09/2017

Member Credit: 95naSTA The point of this thread is to give people a heads up on what they'll have to do to use the 07 Altima motor with the 3.0 timing. If you have the time/skill/money a full 3.5 swap will always out perform a hybrid setup. This is just for…

area74 iO2 V3.1 CatSim Universal Oxygen Sensor Simulator

Relevance: 21%      Posted on: 12/23/2018

This is another option for buying O2 Simulator. They have been testing and fully working on 2002-2003 5thgen Maximas. Should also work on 2004-2008 6thgen Maximas as well. Price: $199.98 Website: http://www.area74.ca/product/io2-universal-oxygen-sensor-simulator/ The iO2 was originally developed as tool to aid in the diagnosis of catalytic converter and oxygen sensor fault codes.We…

P0335, P0726 Codes on 6thgen Nissan Maxima (Transmission Would Not Shift )

Relevance: 20%      Posted on: 07/07/2018

Credit: Sparky's Answers This 2004 Nissan Maxima came in with the complaint that the transmission would not shift properly. The customer stated it felt like the transmission was starting in a high gear. I really did not want to work on this vehicle as the customer informed me that the…

6thgen Maxima Transmission Shifting Issue Fix

Relevance: 20%      Posted on: 02/10/2018

Member Credit: Sparky This 2004 Nissan Maxima came in with the complaint that the transmission would not shift properly. The customer stated it felt like the transmission was starting in a high gear. I really did not want to work on this vehicle as the customer informed me that the…

Where is my Vehicle Speed Sensor (VSS) Wire Located for Radio Installation?

Relevance: 20%      Posted on: 01/26/2018

Member Credit: Mr DoLLa aka Raul When you remove your OEM radio, there are 4 plugs that plug into the radio. Only 2 of the 4 connectors are used with your new aftermarket radio which are the 2 connectors with the larger size pins. The other 2 are not used…

How to Swap a 2002 Maxima Mass Airflow Sensor (MAF) into a 2001

Relevance: 20%      Posted on: 01/01/2018

Member Credit: ridinwitha35 I did a MAF swap today & the results were so drastic I was feeling nice & decided to do a little write-up of the swap. Flooring it knocks me in at least 6k rpms with no hesitation (only floored it twice though); I used to floor it…

Nissan Maxima 04-06 / Altima SE-R 05-06 EGR Delete (10K Ohm Resistor)

Relevance: 18%      Posted on: 06/03/2018

Member Credit: Fuzzyknub / EddyMaxx If you eliminate your EGR valve, you'll likely get a P0400 Exhaust Gas Recirculation Flow Malfunction trouble code. But no worries, here's what you need to do to get rid of the code. EGR (What you will be eliminating/deleting) 1. EGR Block-off Plate Buy the EGR blockoff plate…

Nissan Maxima P1706 Neutral Position Switch

Relevance: 18%      Posted on: 06/22/2019

Member Credit: EddyMaxx Adding some helpful information regarding this code P1706. The sensor was broken and I almost couldn't find it. Replacing the sensor resolved the code. I ran into this issue and decided to document my findings for anyone needing to troubleshoot this. P1706 Nissan DTC: Park Neutral Position…

Racing Seat Airbag Light Fix 1/2 Watt 4.7 Ohm Resistor

Relevance: 16%      Posted on: 12/25/2018

Member Credit: Equinox This is for a 370z but is applicable to 6thgen Maximas as well. DISCLAIMER: REMOVE YOUR STOCK SEAT SRS AIRBAG SYSTEM AT YOUR OWN RISK, I AM NOT CONDONING REMOVAL, NOR DO I TAKE RESPONSIBILITY IF YOU DO SO. Okay, some of you may have put racing…

E-Manage Ultimate Review on 2002 Nissan Maxima

Relevance: 16%      Posted on: 12/25/2017

Member Credit: Unklejoe I purchased a used an E-Manage Ultimate a couple of weeks ago and I finally got everything installed and set up so I figured I should share my experience, as this is not a commonly used device for the 5.5 gen Maximas. Install: I used DandyMax's write up…

How to Install Warpspeed Y-Pipe

Relevance: 16%      Posted on: 12/25/2017

Member Credit: QNO_A32 I installed the Warpspeed Y-Pipe today in my driveway. It is a nice piece and im happy with it. It came with all hardware that you need, and even comes with a nice hanger as well. Took me about 1 hour using hand tools. Things you will…

Helpful Install Information on the Various Types of eBay Headers

Relevance: 15%      Posted on: 01/30/2018

When Maxima owners get the infamous P0420 check engine light code for bad pre-cats, the best route is to go with eBay headers. However, when you search eBay there are various types of header listings that pop-up. This post goes into a little more details about what modification are required…

Knock Sensor FAQ & Replacement on 3rdgen Maxima

Relevance: 15%      Posted on: 01/13/2018

Member Credit: Ken Rosengren FAQ Q) What does a knock sensor do? A) A knock sensor is a specially designed listening device for car engines. It listens for engine knock, or detonation (pinging). Detonation can be very bad for an engine and is the result of the fuel/air mixture exploding too…