Search Results for: Vucuum lines

Results 1 - 30 of 87Page 1 of 3
Results per-page: 10 | 20 | 50 | 100

Stainless Steel Brake Lines for 1999-2003 Nissan Maxima (4thgen/5thgen)

Relevance: 100%      Posted on: 08/01/2020

Stainless Steel Brake Lines for 1999-2003 Nissan Maxima (4thgen/5thgen)

Credit: EddyMaxx My rear brake line on 4thgen Nissan Maxima had a pinch in it and caused a brake fluid leak. I was going to replace it with another stock line but ended up ordering stainless steel brake lines from eBay. You get all 4 brake lines shipped for $67…

300ZX Z32 Caliper Setup Options for 5thgen Nissan Maxima

Relevance: 96%      Posted on: 09/22/2020

300ZX Z32 Caliper Setup Options for 5thgen Nissan Maxima

Blehmco Kit: Z32 Calipers 2004 6thgen Maxima Rotors Relocation brackets Conversion Lines Jeff92se Kit: z32 calipers Cobra rotors relocation brackets center rings conversion lines Z32 Direct Rotor Swap: Z32 calipers Z32 rotors (must be milled down) conversion lines. Additional Info: You have to mill down the diameter of the rotor,…

Matty’s Vortech V1 V2 Supercharger Parts List

Relevance: 58%      Posted on: 11/25/2018

Matty's Vortech V1 V2 Supercharger Parts List

Member Credit: Matty Here is a list of parts you will need if you plan on purchasing my V1 Starter Kit and want to finish off the kit with custom items. Vortech V1 or V2 Blower (Counter Clockwise Rotation, Straight Discharge) The blower NEEDS to have this fitting on it…

Akebono Brake Upgrade Buying Guide for 7thgen Maxima

Relevance: 58%      Posted on: 12/28/2017

Akebono Brake Upgrade Buying Guide for 7thgen Maxima

Member Credit: Joshua Wright Here I will outline everything you will need to purchase to successfully install the Akebono brakes/calipers on our 7thgen Maxima. First (Acquisition of Calipers): Obviously, you will need to get you a set of Akebono calipers. You can get any of them from the following vehicles since…

Nissan Maxima 04-06 / Altima SE-R 05-06 EGR Delete (10K Ohm Resistor)

Relevance: 50%      Posted on: 06/03/2018

Nissan Maxima 04-06 / Altima SE-R 05-06 EGR Delete (10K Ohm Resistor)

Member Credit: Fuzzyknub / EddyMaxx If you eliminate your EGR valve, you'll likely get a P0400 Exhaust Gas Recirculation Flow Malfunction trouble code. But no worries, here's what you need to do to get rid of the code. EGR (What you will be eliminating/deleting) 1. EGR Block-off Plate Buy the EGR blockoff plate…

Matt Faraca aka airmattdog’s 1997 Customized 4thgen Nissan Maxima

Relevance: 50%      Posted on: 12/29/2018

Matt Faraca aka airmattdog's 1997 Customized 4thgen Nissan Maxima

Owner: Matt Faraca aka airmattdog Year: 1997 Model: Maxima Color:  Lamborghini Orange Paint Transmission: Automatic Trim: SE Mod List: Engine: Injen Polished Cai Custom Polished Valve Cover Polished Ac Lines Polished Brake Lines Custom Polished Aluminum Relay Covers Custom Polished Maf Sensor Cover Cusco Polished Oil Catch Tank Weapon R Polished Coolant Tank Nismo Oil…

emdot’s 1996 5-Speed VQ35DE Vortech Supercharged 4thgen Nissan Maxima (316 WHP / 297 TQ)

Relevance: 49%      Posted on: 04/17/2021

emdot's 1996 5-Speed VQ35DE Vortech Supercharged 4thgen Nissan Maxima (316 WHP / 297 TQ)

Owner: emdot Year: 1996 Model: Maxima Color: White Transmission: Manual 5-Speed Transmission Trim: SE Mod List: Engine and Transmission 2003 VQ35DE 3.0 Timing Components and Cam Adapters Vortech V2 Supercharger 3.33" Pulley (~9 PSI) Blitz BOV NWP VIAS Delete Plate RC 440cc Injectors Aeromotive A1000 Fuel Pressure Regulator WeaponR Fuel Rail Adapters Steel…

How to Bleed your Maxima Brakes

Relevance: 48%      Posted on: 01/21/2017

How to Bleed your Maxima Brakes

Member Credit: shift_ice Over time the brake system can take on air as the effectiveness of the brake fluid decreases with age. Air can also enter the system from a leaky brake hose, a bad connection on the brake caliper, during any maintenance when a brake line is removed, or…

How to Replace your Spark Plugs & Coil Packs

Relevance: 47%      Posted on: 12/25/2017

How to Replace your Spark Plugs & Coil Packs

Member Credit: Greg Changing the spark plugs on a 2002-2003 Maxima is not something you should have to do until around 100,000 miles. The stock plugs are platinum tipped and should last a very long time. Replacement of the plugs is something that Nissan recommends you "see your dealer" to…

Daily Driving My 5thgen Nissan Maxima on 100% E85 Fuel (1+Year Review)

Relevance: 46%      Posted on: 01/31/2021

Daily Driving My 5thgen Nissan Maxima on 100% E85 Fuel (1+Year Review)

Community Member Credit: Eddy Just wanted to share my experience and review with E85 over the past 1+ year on daily driving on E85 through all seasons. Not a lot of feedback out there on using E85 for daily driving or in general for the Nissan Maxima. Prior to doing…

How to Replace your ABS Actuator Pump on 6thgen Maxima (2004-2008)

Relevance: 45%      Posted on: 06/07/2018

How to Replace your ABS Actuator Pump on 6thgen Maxima (2004-2008)

Article Credit: EddyMaxx The videos below show you the best way to remove and replace your ABS actuator pump. It is very important that you use the SAME EXACT part number as your old one to avoid any issues. You can find them used on eBay or junkyard. I was…

How to Install 2002-2003 5thgen Brakes on 4thgen Maxima

Relevance: 45%      Posted on: 12/25/2018

How to Install 2002-2003 5thgen Brakes on 4thgen Maxima

Member Credit: 95BLKMAX I wanted bigger brakes, but I didnt want to spend a fortune (as much as one would spend, say for a Z32 upgrade, or the 6th gen rotors with Z32 calipers, etc...) for just front brakes. Plus I dont autoX, I just do alot of highway spirited driving;…

How to Upgrade to 6.5 Gen Bumper While Keeping 04-06 Hood/Headlights

Relevance: 45%      Posted on: 01/20/2018

How to Upgrade to 6.5 Gen Bumper While Keeping 04-06 Hood/Headlights

Member Credit: MissMiami Below are the most commonly asked questions before starting this conversion. This very similar to getting the hybrid bumper which allows you to retain 2004-2006 Headlights/Hood with 2007/2008 Bumper. "Where did you get your 2007 bumper?" I got mine on eBay for about $50.00 on eBay, with about $50.00…

7thgen Maxima with Front Autozone Akebono BBK Installed ($300 Bucks)

Relevance: 44%      Posted on: 02/24/2018

7thgen Maxima with Front Autozone Akebono BBK Installed ($300 Bucks)

Member Credit: EddyMaxx & Michael Bird Tindal Thanks to Michael for posting this information. For approx. $300 bucks, you can have a front Akebono BBK on your 7thgen Maxima. This is for only the Front BBK ONLY. You can do the rear setup as well inexpensively. This is applicable to other…

6thgen Maxima Brake Swap into 4thgen Maxima on 16″ Wheels

Relevance: 44%      Posted on: 10/21/2020

6thgen Maxima Brake Swap into 4thgen Maxima on 16" Wheels

Community Member Credit: vipervadim Another Project from 2014 6gen brakes swap into 4th gen Maxima that clear 16in rims I've seen plenty of 6th gen brake swaps into 4th/5th gens but I've never seen them modified to clear 16in rims. I have 16s, spring and stuts, I plow through potholes…

2000-2003 How to Install Coilovers on 5thgen Nissan Maxima

Relevance: 43%      Posted on: 04/22/2021

2000-2003 How to Install Coilovers on 5thgen Nissan Maxima

Community Member Credit: Fezzik Here is what the rear Coilover that I tested looked like compared to the stock rear suspension. These are still being tested and are not offered yet. You will first want to measure the car’s wheel gap right now and think of how much u want…

The Wizard’s and ptatohed’s Water to Air Aftercooler Project

Relevance: 41%      Posted on: 12/17/2018

The Wizard's and ptatohed's Water to Air Aftercooler Project

Member Credit: The Wizard & ptatohed As a few of you know, ptatohed (Josh) and myself (James) recently installed a water to air aftercooler on his car. After doing a lot of homework, we decided on a 'barrel design' (as opposed to a 'box' design). We ended up going with the…

How to Install Transmission Cooler

Relevance: 41%      Posted on: 01/15/2017

How to Install Transmission Cooler

Member Credit: Greg 1.I bought the Hayden model 404 from Pep Boys for $49.99 plus tax. There were other smaller models, but I figured I would get the largest one practical. The 404 is considered "Heavy Duty" and is 7.5 inches tall by 15.5 inches wide, by 0.75 inches thick.…

Dan Evan’s Turbo 6-Speed Manual 7GM

Relevance: 40%      Posted on: 12/28/2017

Dan Evan's Turbo 6-Speed Manual 7GM

Owner: Dan Evans Year: 2009 Model: Maxima Color: Radiant Silver (K12) Transmission: Manual 6 Speed Trim: Sport/Tech Trim What motivated you to MOD your Maxima? I joined maxima.org in November 2010 and after that my bank account never forgave me. - Dan Evans https://youtu.be/p1gucLyRRyU https://youtu.be/waXka7l34FM https://youtu.be/IrEqPzVXdik Full Mod List / Specs:…

How to Swap 6thgen Brakes on 4thgen to Clear 16″ Wheels

Relevance: 40%      Posted on: 01/01/2018

How to Swap 6thgen Brakes on 4thgen to Clear 16" Wheels

Member Credit: Viper Vadim I've seen plenty of 6th gen brake swaps into 4th/5th gens but I've never seen them modified to clear 16in rims. I have 16s, spring and stuts, I plow through potholes in NYC, I'm never going to drive low and SLOW and avoid all potholes like some…

Relocate Battery & Install Cold-Air Intake on 5thgen Maxima

Relevance: 39%      Posted on: 01/10/2018

Relocate Battery & Install Cold-Air Intake on 5thgen Maxima

Member Credit: Orgullo This is the battery relocation for the 2002/2003 Nissan Maxima. However, I'm sure it will work for the other gens too since it's basically the same. I did this on my 5.5 and my boys 5.5 gen Max. This set up is for people that already have a…

How to Install Akebono BBK on Maxima

Relevance: 39%      Posted on: 12/29/2017

How to Install Akebono BBK on Maxima

Member Credit: twin001 This write-up is for a 2003/2004. But the same steps are application to 6thgen Maxima. Also, for 7thgens you do not need brackets but the installation instructions still hold. This DIY will take you through the basic steps to remove the existing brake components (calipers, rotors, lines) in…

FWD HR Manifold Ported & Polished for 5thgen Maxima

Relevance: 38%      Posted on: 01/15/2018

FWD HR Manifold Ported & Polished for 5thgen Maxima

Member Credit: Shaquille Keon Jenkins As I looked for this mod for the FWD HR, I didn’t see anything for them.  Z1 Motorsports had the option for the VHR engine. So I took it alone myself to try it. I started my polishing the the runners in the lower manifold.…

Kevin Sarabjeet’s 2003 Slammed and Tucked 5thgen Nissan Maxima

Relevance: 38%      Posted on: 12/07/2018

Kevin Sarabjeet's 2003 Slammed and Tucked 5thgen Nissan Maxima

Owner: Kevin Sarabjeet Year: 2003 Model: Maxima Current Color:  Black Transmission: Automatic Trim: SE Main Photo Credits: AF Photography Turbo Version 2 Coming Soon! (Preview) Mod List: Fully Built VQ35DE Fully Shaved & Wire Tucked Engine Bay (1st Maxima to do it at this level of detail) 96mm 8:8:1 Wiseco Pistons Eagle rods ACL Bearings HR…

Nick Gopaul’s aka TLMNICK Supercharged 4thgen Maxima

Relevance: 38%      Posted on: 01/13/2018

Nick Gopaul's aka TLMNICK Supercharged 4thgen Maxima

Owner: Nick Gopaul Social Media: Year: 1995 Model: Maxima Color: Black Emerald (DJ2) Transmission: Manual 5-Speed Trim: SE What motivated you to MOD your Maxima? I’ve always loved the Nissan Maxima…specifically the 4th gen. When the 4th gen was first released in 1995, I liked it from then. When the first…

BlehmCo Maxima Big Brake Kits

Relevance: 36%      Posted on: 01/13/2018

BlehmCo Maxima Big Brake Kits

Member Credit: Matt Blehm Please note that this post is for reference and documentation purposes ONLY. Matt Blehm no longer offers these products or services. Products were available from 2003 to around 2009. BlehmCo Maxima Big Brake Kits Front Big Brake Kit #1--2004 Maxima Rotors with 300ZX calipers: This kit fits…

Knock Sensor FAQ & Replacement on 3rdgen Maxima

Relevance: 35%      Posted on: 01/13/2018

Knock Sensor FAQ & Replacement on 3rdgen Maxima

Member Credit: Ken Rosengren FAQ Q) What does a knock sensor do? A) A knock sensor is a specially designed listening device for car engines. It listens for engine knock, or detonation (pinging). Detonation can be very bad for an engine and is the result of the fuel/air mixture exploding too…