Search Results for: Pathfinder throttle body

Results 1 - 30 of 156Page 1 of 6
Results per-page: 10 | 20 | 50 | 100

Pathfinder TB (Throttle Body) Install on 4thgen Nissan Maxima

Relevance: 100%      Posted on: 05/08/2021

Pathfinder TB (Throttle Body) Install on 4thgen Nissan Maxima

Community Member Credit: Stephen Max Here are the steps involved in converting to a 70mm Pathfinder throttle body: 1. Make or purchase adapter plate, 2. When you first do a trial fitting of the adapter plate to the intake manifold, you will see that the 70mm opening is considerably larger…

How to Remove Your IACV

Relevance: 98%      Posted on: 01/15/2017

How to Remove Your IACV

Member Credit: Freeengineinfo Idle Air Control Valve Replacement Does your car idle rough or the speed cycle up and down. You probably have a bad idle air control valve. The only purpose of the idle air control valve is to keep the engine’s idle smooth. The engine’s computer gives the…

How to Clean Throttle Body and Idle Air Control Valve (IACV) on 4thgen Maxima

Relevance: 85%      Posted on: 09/22/2019

How to Clean Throttle Body and Idle Air Control Valve (IACV) on 4thgen Maxima

Member Credit: Cdg2125 Tools Required: Ratchet 10m socket 12mm socket Flathead or 8mm socket Pliers or vise grips 1 can of Throttle Body cleaner 1 can of Carb cleaner (I find Berrymans B12 to work fastest) New throttle body gasket New IAC Valve Gasket (dealer only) Step 1: Disconnect battery.…

Tune On The Go Thermal Intake Manifold Spacers (Nissan Maxima / Altima) #tuneonthego

Relevance: 81%      Posted on: 11/23/2018

Tune On The Go Thermal Intake Manifold Spacers (Nissan Maxima / Altima) #tuneonthego

Price: $189.99 (Shipped Anywhere in the Continental US) Applications 2009 – 2016 Nissan Maxima 2007 – 2016 Nissan Altima 2007 – 2013 Nissan Altima Coupe Tune On The Go is proud to present phenolic its 2pc thermal intake spacers. These spacers are made from 3/8 thick high-grade phenolic. The spacers…

Cable Driven 75MM Throttle Body Installed on 1995-1999 4thgen Maxima

Relevance: 79%      Posted on: 03/26/2018

Cable Driven 75MM Throttle Body Installed on 1995-1999 4thgen Maxima

Community Member Credit: schmellyfart I've had this project on the back burner for the better part of the last year and a half, but it is finally done. 75mm TB on an A32 3.5 swap with a functioning IACV. The TB is an aftermarket 75mm TB produced for a 86-93 Mustang,…

Adjust Throttle Position Sensor (TPS) on 4thgen Nissan Maxima

Relevance: 65%      Posted on: 05/08/2021

Adjust Throttle Position Sensor (TPS) on 4thgen Nissan Maxima

Community Member Credit: vbxmaxima Well, if you're here, you are probably experiencing some trouble because the TPS is not a regular maintenance item! Unfortunately, TPS failure seems rather common. It's happened to me, and I see it in one to two other Maxima enthusiasts a year. Heck when Edmunds.com was…

How to Add Drop Resistor Mod on 4thgen Nissan Maxima Automatic Transmission

Relevance: 60%      Posted on: 12/19/2020

How to Add Drop Resistor Mod on 4thgen Nissan Maxima Automatic Transmission

Community Member Credit: JIME This mod forces the transmission to shift at FULL Line Pressure at all times the switch is on. A WOT (Wide Open Throttle) switch is best suited for this purpose because the part throttle shifts are extremely harsh and could damage the transmission. The drop resistor…

How to Install Kinetix Intake Manifold

Relevance: 59%      Posted on: 01/05/2017

How to Install Kinetix Intake Manifold

Community Member Credit: DeusExMaxima The procedure for removing the OEM intake and replacing it with the Kinetix was fairly straightforward. With basic hand tools, I did the job at a casual pace in under 2 hours. Tools Needed: Allen wrench (supplied with manifold) 10mm, 12mm, and 14mm wrenches and sockets…

How to Install a 2000 5thgen VI Manifold on 4thgen Nissan Maxima

Relevance: 58%      Posted on: 02/16/2020

How to Install a 2000 5thgen VI Manifold on 4thgen Nissan Maxima

Member Credit: sdot82 This write-up is for a 2000-01 VI manifold swap on to 95-99 Maxima. There are many ways to do this swap so first I will number the ways I know how to do this and then go into detail on how to do it. There are a…

How to Install NWP Phenolic Performance Intake Spacers

Relevance: 58%      Posted on: 01/20/2018

How to Install NWP Phenolic Performance Intake Spacers

Member Credit: NWP Engineering Prevent heat from transferring from your heads to intake manifold and throttle body! Improve Airflow by eliminating the need for intake gaskets. Each spacer is CNC Machined to the highest tolerances to ensure the best airflow possible. All NWP spacers are port matched to your stock…

4thgen Nissan Maxima Mass Airflow MAF Sensor Mod

Relevance: 58%      Posted on: 12/12/2020

4thgen Nissan Maxima Mass Airflow MAF Sensor Mod

Community Member Credit: greghome At one point on the Maxima message boards in late 1999 there was a lot of talk about increasing airflow through the Maxima intake by removing the screen from the Mass Airflow (MAF) Sensor. The screen is not a secondary filter as one might suspect. Its…

How to Install CXJ Performance 3pc Thermal Phenolic Spacers

Relevance: 55%      Posted on: 01/08/2017

How to Install CXJ Performance 3pc Thermal Phenolic Spacers

Member Credit: CXJ Performance DISCONNECT THE BATTERY FIRST! This would be great time to change the spark plugs as well. Remove the upper intake manifold. Once the manifold has been removed it will look like the picture shown below: STOP EVERYTHING! PLACE RAGS INTO THE CHAMBERS. If a bolt is dropped…

Replacing the Fuel Injectors on 3rd Gen Maxima

Relevance: 54%      Posted on: 01/14/2018

Replacing the Fuel Injectors on 3rd Gen Maxima

Member Credit: Bryan Tisch Below are the procedures that I used in performing the replacement of six of my fuel injectors. I put them on this web page to serve as guidance for you, but do not guaranty the results nor do I proclaim this is the correct procedure, though I reference…

Nissan Maxima P0300 Series – Resolved by Changing Fuel Filter

Relevance: 53%      Posted on: 11/11/2019

Nissan Maxima P0300 Series - Resolved by Changing Fuel Filter

Member Credit: sparky1562 The Issue Left work Friday afternoon everything was okay. No signs of previous issues, no codes. Sitting at a stoplight the car started shaking real bad, hit the gas to go and she kept running but very rough. The check engine came on. I went to blinking…

Nissan Maxima 04-06 / Altima SE-R 05-06 EGR Delete (10K Ohm Resistor)

Relevance: 51%      Posted on: 06/03/2018

Nissan Maxima 04-06 / Altima SE-R 05-06 EGR Delete (10K Ohm Resistor)

Member Credit: Fuzzyknub / EddyMaxx If you eliminate your EGR valve, you'll likely get a P0400 Exhaust Gas Recirculation Flow Malfunction trouble code. But no worries, here's what you need to do to get rid of the code. EGR (What you will be eliminating/deleting) 1. EGR Block-off Plate Buy the EGR blockoff plate…

How to Fix VIAS

Relevance: 49%      Posted on: 01/15/2017

How to Fix VIAS

This applies to 2000-2001 5thgens. VIAS stands for Variable Intake Air System. It is made up of a power rod going through your intake manifold that holds a series of butterfly valves. A solenoid turns the rod at 5000 rpm to open the valves to allow the engine to breathe…

ghostmax301’s 1995 5-Speed VQ30DE-K Turbo 4thgen Nissan Maxima

Relevance: 47%      Posted on: 04/17/2021

ghostmax301's 1995 5-Speed VQ30DE-K Turbo 4thgen Nissan Maxima

Owner: ghostmax301 Year: 1995 Model: Maxima Color: White Transmission: Manual 5-Speed Transmission Trim: SE Mod List: Engine and Transmission 2001 DEK  Motor Pathfinder Throttle Body 300ZX Fuel Filter Z32 MAF 255LPH Fuel Pump 440CC Injectors 1-Step Colder Plugs EMU w/ MAP sensor Fidanza Flywheel 2000 Maxima Clutch Kit Stainless Steel Clutch Line 2.25…

David’s 409WHP Supercharged 6-Speed Gen2 VQ35DE 5thgen Maxima (Part 2)

Relevance: 47%      Posted on: 12/13/2020

David's 409WHP Supercharged 6-Speed Gen2 VQ35DE 5thgen Maxima (Part 2)

Owner: David Colaire Year: 2001 Model: Maxima Color: Satin Blue Pearl Transmission: Manual 5-Speed to 6-Speed Swap Trim: SE Part 1 Feature: https://www.my4dsc.com/david-colaires-2001-6-speed-hr-swapped-5thgen-maxima/ Videos: Full Mod List / Specs: 2013 Altima HR 10.3:1 Motor Rev-up Cams Re-timed for Boost Rev-up Oil Pump Maxima HR 'C' manifold 70MM Pathfinder Throttle Body 440cc injectors Aeromotive Adjustable…

MAF, TB, IACV, EGR Cleaning for Dummies on 4thgen Nissan Maxima

Relevance: 46%      Posted on: 09/22/2019

MAF, TB, IACV, EGR Cleaning for Dummies on 4thgen Nissan Maxima

Member Credit: 96i30azn I cleaned my MAF, TB, IACV, and EGR guide tube last week after some extensive research here on the org. I felt like none of the threads included directions for a total newb to do everything. Doing everything at the same time makes sense b/c if you're…

What does my Air Fuel Ratio (AFR) Mean?

Relevance: 45%      Posted on: 12/02/2017

What does my Air Fuel Ratio (AFR) Mean?

Source Credit: SAFR Tool Air Fuel Ratio (AFR) is the ratio of air to fuel in an internal combustion engine. The AFR is an important measure for performance-tuning reasons. If exactly enough air is provided to completely burn all of the fuel, the ratio is known as the stoichiometric mixture…

How to Make Idle Air Volume Relearn Stick on 5thgen Nissan Maxima

Relevance: 45%      Posted on: 12/17/2020

How to Make Idle Air Volume Relearn Stick on 5thgen Nissan Maxima

Community Member Credit: Thrillho In case you've disrupted your throttle body and need to perform the Idle Air Volume Relearn, you've probably noticed that it doesn't "stick" , meaning it worked fine for the time being and then it didn't. I am using the Nissan Data Scan app with an…

Caleb Anderson’s 6-Speed Gen2 VQ35DE Turbo Nissan Altima (421WHP / 390TQ)

Relevance: 45%      Posted on: 09/28/2019

Caleb Anderson's 6-Speed Gen2 VQ35DE Turbo Nissan Altima (421WHP / 390TQ)

Owner: Caleb Anderson Year: 2005 Model: Altima Color: Silver Engine: Gen2 VQ35DE (FWD HR Swap) Transmission: 6-Speed Manual Trim: SE-R Mod List: 2013 Maxima Gen2 VQ35DE Engine (HR Swap) Tuned on UpRev on3 performance 61mm GT3582R Turbo  Custom Turbo Kit w/ Manzo Headers 44mm on3 Wastegate 50mm on3 BOV Full 3 Inch Intercooler Piping…

Monceif Faiks’s Modded 5thgen Nissan 2001 Maxima SE

Relevance: 45%      Posted on: 12/02/2020

Monceif Faiks’s Modded 5thgen Nissan 2001 Maxima SE

This Maxima has made significant progress over the course of the past few years. Initially working on a college student budget, the car began life with its current owner as a completely factory spec Anniversary Edition Maxima. Completely stock, with the 3.0L VQ30 engine. Initially, this car was intended to…

FWD VQ35 HR Swap TPS Sensor Wiring 5.7 Gen

Relevance: 44%      Posted on: 03/31/2018

FWD VQ35 HR Swap TPS Sensor Wiring 5.7 Gen

Member Credit: Austin Golde So I am currently in the middle of swapping an HR motor from a 7th gen Maxima into my 5th gen and came across the throttle body harness swap and I couldn't find anything about it via searching besides buying an adapter online so I thought I'd…

Installing an Injen Cold-Air Intake on 5thgen Maxima

Relevance: 43%      Posted on: 12/25/2017

Installing an Injen Cold-Air Intake on 5thgen Maxima

Member Credit: Greg I ordered the Injen Cold-Air Intake from Adventon.Com for the price of $238.56, which included UPS 3-day shipping. If you don't need it in 3 days, knock $13.75 off that price. I found Adventon a pleasure to deal with and would highly recommend them to anyone interested…

How to Install Sun Hyper Force Ignition Tuner

Relevance: 42%      Posted on: 01/05/2017

How to Install Sun Hyper Force Ignition Tuner

Community Member Credit: NiZMo1o1 The Sun Auto Hyper force is an ignition enhancer, in which provides greater throttle response and smoother engine performance by providing optimal spark duration and maximum voltage output. This product is very effective at higher revs where a normal spark would diminish, specially on boosted 350Zs/…

VQ35DE Swapped and Superchaged 1998 Maxima

Relevance: 42%      Posted on: 05/06/2018

VQ35DE Swapped and Superchaged 1998 Maxima

Member Credit: mastercater7 aka Zack I wanted to post on here to share my project as well as do my best to help others. I am a member on maxima.org, but as far as having a boosted VQ35, there are not many people. Thus, needing input or help with problems can…

Vortech / Stillen Supercharger Helpful Information for Nissan Maxima

Relevance: 41%      Posted on: 11/25/2018

Vortech / Stillen Supercharger Helpful Information for Nissan Maxima

Member Credit: JAY25 NGK 1 and 2 Step Colder Spark Plug Part Numbers Go to NAPA to get the copper plugs, you can get them as cheap as $1.20 a piece and up to $1.99 a piece change them out every 20k. Stock heat range copper plugs: NGK #BKR5E-11 Nissan #…

Maxime Daigneault’s 2002 Modded VQ35DE 6-Speed Nissan Altima

Relevance: 40%      Posted on: 04/05/2021

Maxime Daigneault's 2002 Modded VQ35DE 6-Speed Nissan Altima

Owner: Maxime Daigneault Year: 2002 Model: Altima Color: BX4 Opal Blue Metallic Transmission: 6-Speed Manual Trim: SE Mod List: 3.5" Intake NWP 75MM Throttle Body NWP 5-Piece Intake Spacer Kit Upper Intake Manifold Gutted SSIM Ported and Polish Home Made by Me the Lower Just Polish NWP Block-off Plate AEM 340LPH Fuel…