| Results 1 - 30 of 242 | Page 1 of 9 |
| Results per-page: 10 | 20 | 50 | 100 |
Relevance: 100% Posted on: 07/08/2018
Member Credit: Twin001 Both the Nissan 370Z and the Infiniti G37 calipers are the same size, simply done in different colors respectively. They both will interchange 100% with each other, and all hardware remains the same for both calipers. Size: Front caliper: 4-pot Rear caliper: 2-pot Front rotor: 355mm /…
Relevance: 85% Posted on: 12/23/2018
Member Credit: Mikkellucci I purchased the Akebono calipers, pads, etc. However, I just couldn’t go thru with adding that much unnecessary rotor weight to my car. And I’m talking about the Z1 “light weight” 2 piece ($1300) front and rear rotors. Even those add a ton of F/R weight because…
Relevance: 78% Posted on: 10/31/2018
Member Credit: Nperez1986 / Jonthon Rubia If you are looking to upgrade to the Akebono 4-Piston BBK from a Nissan 370z / Infiniti G37 Sport, you now have the option to use 300ZX (Z32) caliper adapter brackets on eBay. The bracket themselves are $70 bucks shipped. In order for this to work,…
Relevance: 76% Posted on: 01/13/2018
Member Credit: Matt Blehm Please note that this post is for reference and documentation purposes ONLY. Matt Blehm no longer offers these products or services. Products were available from 2003 to around 2009. Lower Tie Bar: Now for 89-2003 Maxima, and B14 200SX/Sentra! This part is designed to tie the front…
Relevance: 73% Posted on: 12/29/2017
Member Credit: Ghozt Here are instructions for how to remove your front bumper fascia, or what many of you simply know as the front bumper of your car. One note: if you have the Stillen lip installed 2 of the screws on the bottom will be covered and only accessible…
Relevance: 72% Posted on: 06/07/2020
Owner: Rani F. Year: 2007 Model: Maxima SL Color: White Wheel/Suspension Setup: BC Coilovers Fitted w/ UAS Airbags Front Bags: "Aero Sport" By Universal Air Part # 02-ST-SB-14 ($220 Each) Rear Bags: "Air House 2" By Universal Air Part # 02-2600 ($79 Each) Front Mounts: If your front strut mounts are bad…
Relevance: 70% Posted on: 02/07/2017
Member Credit: Marko Cvetic Tools: 10mm Socket Wrench If you have a Stillen front lip and is painted make sure to lay a towel down so the lip doesn't scratch. This will give you access to the headlights, foglights and grill
Relevance: 68% Posted on: 01/14/2018
Member Credit: beancooker 1. Remove all heat shields (10mm wrench). 2. Remove O2 sensors. 3.Spray penetrating oil on all bolts to be taken out. YOU WILL NEED A PIVOTING ADAPTER FOR YOUR SOCKET WRENCH. Remove 3 bolts on front bank, 3 bolts on rear bank and 2 bolts on cat.…
Relevance: 67% Posted on: 03/26/2018
Member Credit: schmellyfart Greetings everyone, today I will be showing you how to install MKIII MR2 (ZZW30) seats in your A32. First off, the most important part - weight. A32 '97 SE Power Cloth Driver Seat = 44lbs A32 (unknown year&trim) Manual Cloth Driver Seat = 40lbs ZZW30 '02 Spyder Manual…
Relevance: 64% Posted on: 11/12/2018
Member Credit: EddyMaxx My front bumper had a noticeable sag. When I took the bumper off, I found that it did not have the clips that hold it up. Easy and cheap enough to fix! I ordered two clips and it resolved my "bumper sag" issue. Part Number: 62228-7Y000 (Clip,…
Relevance: 63% Posted on: 05/12/2018
The Magic Drift Subaru Impreza STi Front Lip officially fits the 2007/2008 6thgen Maxima. Must have the 07/08 bumper for this specific lip. See information below: Price: $74.99 Order Link: Search Words: 2006 2007 IMPREZA STi URETHANE FRONT Bumper LIP CS2 V2 S204 V-SPEC V-LIMITED PU Fitment Photos:
Relevance: 62% Posted on: 09/19/2020
Owner: Waleed Ali Year: 2003 Model: Maxima Current Color: Charcoal Transmission:4-Speed Automatic Trim: GLE Photographer Credits (Instagram): captured_by_dylan & caits.shots Mod List: Injen Cold Air Intake Custom Side Exhaust w/ 3rd cat, Resonator & Muffler Delete 2000-01 GLE Rear Red Taillights Custom Reflectors w/ Custom Turn Signals Function (While Retaining OEM Parking Light…
Relevance: 62% Posted on: 01/27/2018
The 2012-2015 7thgen Maxima grille has a better look over the 2009-2011 grille. It's an easy swap. See reference photos below: 2009-2011 Maxima Grille 2013-2015 Maxima Grille
Relevance: 59% Posted on: 02/24/2018
Member Credit: EddyMaxx & Michael Bird Tindal Thanks to Michael for posting this information. For approx. $300 bucks, you can have a front Akebono BBK on your 7thgen Maxima. This is for only the Front BBK ONLY. You can do the rear setup as well inexpensively. This is applicable to other…
Relevance: 59% Posted on: 01/08/2017
Member Credit: DeusExMaxima Well, after all the trials and tribulations of installing a part never installed before, I'm finally finished. I took the car for a test drive. Clearly, the car does not lean at all. VERY flat handling, and very nice tracking through a turn. I like the tighter feel…
Relevance: 59% Posted on: 01/27/2019
Member Credit: NC5thGen Added 6th gen 2004-2006 dual power/heated front seats in my 5th gen. Process was pretty simple by swapping the rails/tracks from the 5th gen seat to the 6th gen seat cushions. No frame modifications needed just swap over and use the harness plugs. Seat airbag connections were…
Relevance: 58% Posted on: 12/25/2017
Member Credit: Greg Stillen Front Strut Tower Brace before install. The simple purpose of this ingenious device is to lock the tops of the shock towers together in the engine compartment. Result is the suspension "box" is complete, and the car corners much flatter than stock, with a greater degree…
Relevance: 58% Posted on: 08/18/2017
Member Credit: 99BlackMaxMS So upon installation of the kit, my car developed a small oil leak that turned worse as time passed. It started after installing the supercharger, so I tried everything possible. I replaced sandwich plate & fittings, feed line fitting and eventually after pulling the blower, I saw that…
Relevance: 57% Posted on: 11/24/2018
Member Credit: Charles Downer Tools & Materials Needed Ratcheting Wrench Screwdriver (Phillips) Wire Cutters Gauge Wire Lots of Patience REMOVING OLD SEATS: Remove bottom of rear seats held in by 4 tabs directly under that can be pulled for a quick release...that section slides out after release Remove bolts (14MM)…
Relevance: 57% Posted on: 01/19/2018
This is for reference and documentation purposes. The car was for sale around 2014 for $23,995. We're not sure if it ever sold. Full Mod List / Specs: Stillen V1 Supercharger Kit With 300 HP 5-Speed Manual Transmission Oil Cooler and Remote Oil Filter System Performance Exhaust System Camber Adjuster Front…
Relevance: 55% Posted on: 01/20/2018
Member Credit: cfr94 This installation process is for a set of Eibach Suspension Springs Pro Kit 6369.140 with 2.0" drop in front & 0.8" drop in rear. REAR END: 20-30 minutes Tools Needed: Air rachet or air gun, 18mm socket 3/4" open wrench & adjustable floor jack These instructions are…
Relevance: 55% Posted on: 07/18/2020
Owner: Corey Mott Year: 2005 Model: Altima SE-R Color: Smoke Metallic Engine: VQ35DE Transmission: 6-Speed Manual Mod List: Ionic Dynamics Carbon Fiber Engine Cover Mishimoto Catch Can Mishimoto Radiator Mishimoto Oil Cap Mishimoto Carbon Fiber Radiator Cap Mishimoto Power Steering Reservoir Moog Front Sway End Links Moog Rear Sway End Links…
Relevance: 55% Posted on: 01/21/2018
Owner: Jose Vargas Year: 1999 Model: Maxima Color: Sterling Mist Gray Transmission: Auto to Manual 5-Speed Trim: SE This feature is dedicated to Jose Vargas who is a long-time Maxima OG and good friend from Brooklyn, NYC. The photos are low resolution as they were taken many many years. Hope you enjoy his…
Relevance: 53% Posted on: 12/23/2018
High and Low Beam Headlamp Light Bulb Size: 9003 or 9003 HID Upgrade Kit Parking Light Bulb Size: 1157A Front Turn Signal Light Bulb Size: 1157A Rear Turn Signal Light Bulb Size: 1156A or 7507 Tail Light Bulb Size: 7443 Stop Light Bulb Size: 7443 High mount stop Light Bulb…
Relevance: 53% Posted on: 06/14/2020
If you are looking to upgrade to Nissan 370z / Infiniti G37 Akebono Calipers, then below is the information you need to know when using the Autosports Engineering brackets. The brackets are decently priced and work fine. however, various members have reported some pad "overhang" which has varied (some worse…
Relevance: 52% Posted on: 10/19/2020
Community Member Credit: pmas76 The lights that I use to illuminate the clear corners are the PIAA Xtreme Whites (194 Wedge Bulb) which you can also get from Custommaxima.com. I got the PIAA Xtremes because of their recommendations from fellow Maxima.org members and the fact that I use PIAA Xtreme…
Relevance: 52% Posted on: 12/23/2018
High & Low Beam Headlamp Light Bulb Size: 9004 or 9004 HID Upgrade Kit or 9004 LED Upgrade Kit Parking Light Bulb Size: 1157 Front Turn Signal Light Bulb Size: 1156 Rear Turn Signal Light Bulb Size: 1156 Tail Light Bulb Size: 1157 Stop Light Bulb Size: 1157 High Mount…
Relevance: 52% Posted on: 12/23/2018
Low Beam Headlight Bulb Size: H11 High Beam Headlight Bulb Size: 9005 Parking Light Bulb Size: 3457A Front Turn Signal Light Bulb Size: 3457A Rear Turn Signal Light Bulb Size: 992 (7440A) Tail Light Bulb Size: LED Stop Light Bulb Size: LED High Mount Stop Light Bulb Size: LED Fog/Driving Light Bulb Size: H11 License Plate Light Bulb Size: 168…
Relevance: 51% Posted on: 02/02/2018
Member Credit: Stillen Tools/Materials required: Assorted wrenches/sockets Pulley puller Pry Bar Torque wrench Anti-seize Factory repair manual New belts (Gates K070653) Notes: Please refer to the factory service manual for additional information on removal of additional items. Remove the crankshaft pulley as follows: Step 1. Disconnect the battery, raise the…
Relevance: 51% Posted on: 12/23/2018
Low Beam Headlight Bulb Size: HID-D2R or HID-D2R HID Upgrade Kit High Beam Headlamp Bulb Size: 9005 or 9005 HID Upgrade Kit or 9005 LED Upgrade Kit Parking Light Bulb Size: 168 Front Turn Signal Light Bulb Size: 7440 Rear Turn Signal Light Bulb Size: 7440 Tail Light Bulb Size:…