Search Results for: Elite seat

Results 1 - 30 of 77Page 1 of 3
Results per-page: 10 | 20 | 50 | 100

How to Wire-up “Elite Edition” Interior Seats on your 04-08 Maxima

Relevance: 100%      Posted on: 11/24/2018

How to Wire-up "Elite Edition" Interior Seats on your 04-08 Maxima

Member Credit: Charles Downer Tools & Materials Needed Ratcheting Wrench Screwdriver (Phillips) Wire Cutters Gauge Wire Lots of Patience REMOVING OLD SEATS: Remove bottom of rear seats held in by 4 tabs directly under that can be pulled for a quick release...that section slides out after release Remove bolts (14MM)…

7thgen Maxima Retrofitted with Limited Edition 6thgen Elite Interior

Relevance: 93%      Posted on: 11/22/2018

7thgen Maxima Retrofitted with Limited Edition 6thgen Elite Interior

Member Credit: Adam Chevront This is the first official 7thgen with a 6thgen Nissan Maxima Elite Interior. And best of all, it only cost him $30 bucks via a junkyard run. Some notes: Elite has a longer rear seat length A lot of trimming was required (plastics and metal brackets) Elite

Swapping 6thgen Front Leather Heated Seats into 5thgen Nissan Maxima

Relevance: 80%      Posted on: 01/27/2019

Swapping 6thgen Front Leather Heated Seats into 5thgen Nissan Maxima

Member Credit: NC5thGen Added 6th gen 2004-2006 dual power/heated front seats in my 5th gen. Process was pretty simple by swapping the rails/tracks from the 5th gen seat to the 6th gen seat cushions. No frame modifications needed just swap over and use the harness plugs. Seat airbag connections were…

MKIII MR2 Seat Install on 4thgen Nissan Maxima

Relevance: 69%      Posted on: 03/26/2018

MKIII MR2 Seat Install on 4thgen Nissan Maxima

Member Credit: schmellyfart Greetings everyone, today I will be showing you how to install MKIII MR2 (ZZW30) seats in your A32. First off, the most important part - weight. A32 '97 SE Power Cloth Driver Seat = 44lbs A32 (unknown year&trim) Manual Cloth Driver Seat = 40lbs ZZW30 '02 Spyder Manual…

Installing Leather Evo IX Recaro Seats on 6thgen Maxima

Relevance: 67%      Posted on: 01/08/2018

Installing Leather Evo IX Recaro Seats on 6thgen Maxima

Member Credit: DeusExMaxima I looked at and sat in many many seats. I had several criteria: 1. Lightweight (under 35 lbs) - This is an easy way to drop lots of weight. The OEM seats are 65 lbs EACH. 2. High bolsters - I want to be held in by the…

350z Seats Installed into 5thgen Nissan Maxima – Reference Information

Relevance: 64%      Posted on: 04/12/2021

350z Seats Installed into 5thgen Nissan Maxima - Reference Information

The track width between the 350z and Maxima was the exact same and was key to making this swap work. Also viable, using a seat from a B15 Sentra (00-06) - as these are a direct swap with 5/5.5 Max seats. Also, this guide is only if you have 2…

How to Swap 2000-03 Maxima/I30 Seats into 4thgen Maxima

Relevance: 63%      Posted on: 01/01/2018

How to Swap 2000-03 Maxima/I30 Seats into 4thgen Maxima

Member Credit: made in china I am going to try my best to explain how to install the newer seats from Gen 5/5.5's. I installed heated, power front and heated rear seats into my cloth interior 97 SE.   There is 4 12mm bolts holding the seat bottom on. Remove…

How to Remove and Replace Drivers Seat Filter on 2009-2015 7thgen Nissan Maxima

Relevance: 60%      Posted on: 08/08/2021

How to Remove and Replace Drivers Seat Filter on 2009-2015 7thgen Nissan Maxima

Community Member Credit: vr4z06gt DISCLAIMER: I am not responsible if you screw this up. It really really really hard to do, but it's your own fault if you do. This is just for reference. I decided to change the filter in the driver's seat this weekend. It is recommended in…

4thgen Nissan Maxima Mode Door Motor Replacement

Relevance: 59%      Posted on: 12/24/2018

4thgen Nissan Maxima Mode Door Motor Replacement

Member Credit: evintho Fixed my non working climate control with a mode door motor replacement. Took some pics while I was at it to hopefully help the next guy who does it. The beast in question is my '99 GLE. First I ran diagnostics as per the FSM. Everything pointed…

6thgen Maxima with Four Point Harness Seat Install

Relevance: 58%      Posted on: 01/27/2018

6thgen Maxima with Four Point Harness Seat Install

Member Credit: DeusExMaxima Since my car is built for performance and i do some autocrossing, I decided to install some four point harnesses. My local speed shop, CNC Motorsports, had some nice red Sparco 2 inch "street" type harnesses in stock. The lap belts were a straightforward install - left…

2002 Nissan Maxima with 350z Heated & Power Seats

Relevance: 57%      Posted on: 02/11/2018

2002 Nissan Maxima with 350z Heated & Power Seats

Member Credit: Paul Hallquist aka nicelowz Some of you may have seen this in a few other Maxima groups. I did a 350Z heated and power seat swap into my 2002 Maxima. I used the 350z seat rails and all. I cut the 350z mounts from the rails and bolted the rails…

Racing Seat Airbag Light Fix 1/2 Watt 4.7 Ohm Resistor

Relevance: 53%      Posted on: 12/25/2018

Racing Seat Airbag Light Fix 1/2 Watt 4.7 Ohm Resistor

Member Credit: Equinox This is for a 370z but is applicable to 6thgen Maximas as well. DISCLAIMER: REMOVE YOUR STOCK SEAT SRS AIRBAG SYSTEM AT YOUR OWN RISK, I AM NOT CONDONING REMOVAL, NOR DO I TAKE RESPONSIBILITY IF YOU DO SO. Okay, some of you may have put racing…

FX35 Front Driver Seat Control Switch Buttons Not Working and Stuck (FIXED)

Relevance: 50%      Posted on: 10/02/2020

FX35 Front Driver Seat Control Switch Buttons Not Working and Stuck (FIXED)

Community Member Credit: Eddy My recline and power seat move button stopped working. Seems like they were stuck. I'm sure I could have taken it off and tried to prepare it but I found a better solution that worked for me. I bought two Dorman 85919 toggle switches and swapped…

How to Remove Rear Seat and Deck Lid Removal on 2009-2015 7thgen Nissan Maxima

Relevance: 49%      Posted on: 08/08/2021

How to Remove Rear Seat and Deck Lid Removal on 2009-2015 7thgen Nissan Maxima

Community Member Credit: vr4z06gt The usual disclaimer, I am sure I left things out, I am not a certified mechanic, this is for instructional purposes only, if you screw it up it's not my fault. Follow this at your own risk. I recommend (I didn't however), that you disconnect the…

How to Fix Bose Deck Rattle and Improve Sound Quality

Relevance: 45%      Posted on: 01/25/2018

How to Fix Bose Deck Rattle and Improve Sound Quality

Member Credit: shift_ice After using the search function on Maxima.org at length to get a feel for all the ways people have fixed their Bose deck rattle, I decided to completely remove the rear seats, C-pillars, and rear deck from the car and put my ears to work. The rattle…

How to Install Walbro 255 Fuel Pump

Relevance: 43%      Posted on: 01/05/2017

How to Install Walbro 255 Fuel Pump

Member Credit: Chernmax OK, I had been pumping more air (well I'm boosted) and wanted a better fuel balance so I talked with Tim at Speed Force Racing who makes the 6th Gen Turbo kit and he recommended installing the Walbro 255 fuel pump which I did yesterday. After install…

The Back Seat Fold Down MOD for 4thgen Maxima

Relevance: 42%      Posted on: 12/25/2018

The Back Seat Fold Down MOD for 4thgen Maxima

Member Credit: Redline Maxima As we all know, there is no way to make our back seats fold down. Here is an option to make it happen. With MAXUS scheduled to be in Central Florida next year, I felt that I needed to step my game up on the interior…

How to Make your Maxima Lose Weight aka “Weight Reduction”

Relevance: 35%      Posted on: 01/24/2018

How to Make your Maxima Lose Weight aka "Weight Reduction"

Member Credit: http://lighter.maxdes.net/ * Means that the track car has done part or all of the step.  Other numbers have come from research and other maxima.org members that have kindly donated their numbers. Specs/Weight from a 1996 Nissan Maxima (These weights are without fluids): GLE 2982lb (extra weight items include the moonroof, climate control, automatic,…

Greddy Spectrum Elite Exhaust for 6thgen Maxima

Relevance: 33%      Posted on: 01/19/2018

Greddy Spectrum Elite Exhaust for 6thgen Maxima

This exhaust is no longer available for sale. This is only for reference and documentation purposes. It cost approx. $900.00-$1,000 when it was available for sale. The part number was 10127021. GReddy’s SE exhaust systems deliver the full spectrum of features desired in a street performance system. SE exhausts increase…

Miguel Arroyo’s Supercharged N2O 4thgen

Relevance: 31%      Posted on: 10/09/2017

Miguel Arroyo's Supercharged N2O 4thgen

Owner: Miguel Arroyo Year: 1999 Model: Maxima Color: Custom Candy/Pearl Tangerine Orange Transmission: Manual 5spd Trim: SE-L also known as 99.5 or 4.5 Gen What motivated you to MOD your Maxima? I've been a Nissan guy all my life and I love the body style specifically on this model, it's also…

Miguel Arroyo’s 5-Speed VQ30DE Supercharged N2O 4thgen (2021 Edition)

Relevance: 31%      Posted on: 05/29/2021

Miguel Arroyo's 5-Speed VQ30DE Supercharged N2O 4thgen (2021 Edition)

Owner: Miguel Arroyo Year: 1999 Model: Maxima Color: Custom Candy/Pearl Tangerine Orange Transmission: Manual 5spd Trim: SE-L also known as 99.5 or 4.5 Gen Full Mod List / Specs: Vortech V2 Supercharger with 2.62" pulley 00VI swap with Power Rod Set to Open at 4900RPM Pathfinder Throttle Body (PFTB) with Block…

How to Remove Rear Package Deck on 2004-2008 Maxima

Relevance: 27%      Posted on: 11/24/2018

How to Remove Rear Package Deck on 2004-2008 Maxima

Member Credit: Hawk7886 The stock speakers on the 04 Max just don't cut it for me, so I decided to take apart the rear deck and swap them out with a pair of 6X9s I had sitting around. I'm planning something with more punch in the future, but I figured…

How to Change the Fuel Filter

Relevance: 26%      Posted on: 01/21/2017

How to Change the Fuel Filter

Member Credit: shift_ice According to Nissan the 5th Gen Maxima has a "lifetime" filter that never needs changed. In my opinion there is no such thing as a lifetime filter, so I changed mine recently. Many on maxima.org agree that a change is a good idea, and the general consensus…