Search Results for: Ecu

Results 1 - 30 of 149Page 1 of 5
Results per-page: 10 | 20 | 50 | 100

Adjust Throttle Position Sensor (TPS) on 4thgen Nissan Maxima

     Posted on: 05/08/2021

Adjust Throttle Position Sensor (TPS) on 4thgen Nissan Maxima

Community Member Credit: vbxmaxima Well, if you're here, you are probably experiencing some trouble because the TPS is not a regular maintenance item! Unfortunately, TPS failure seems rather common. It's happened to me, and I see it in one to two other Maxima enthusiasts a year. Heck when Edmunds.com was…

How to Remove 1995-1999 4thgen Nissan Maxima Upper Intake Manifold

     Posted on: 04/30/2021

How to Remove 1995-1999 4thgen Nissan Maxima Upper Intake Manifold

Community Member Credit: ATTappman Recently I had to remove my UIM to tighten the hose clamps on the coolant hoses connected to the backside of the UIM. Here's a description of the job with some photos. The car is a 1997 GLE Fed spec. Part 1: First, you have to…

Jerry Herrera’s 2003 6-Speed VQ35DE 5thgen Nissan Maxima

     Posted on: 04/18/2021

Jerry Herrera's 2003 6-Speed VQ35DE 5thgen Nissan Maxima

Owner: Jerry Herrera Instagram: @5.5genjry Year: 2003 Model: Maxima Color: White Transmission: 6-Speed Manual Trim: GLE Mod List: 2003 6-Speed HLSD Manual Swapped Max GLE with full SE interior swap Nisformance Stock Re-flashed ECU Desmond Motorsports Catch Can Unorthodox Racing Aluminum Underdrive/Crank Pulley Stillen Front Mount Strut Bar Custom 3” SRI with…

emdot’s 1996 5-Speed VQ35DE Vortech Supercharged 4thgen Nissan Maxima (316 WHP / 297 TQ)

     Posted on: 04/17/2021

emdot's 1996 5-Speed VQ35DE Vortech Supercharged 4thgen Nissan Maxima (316 WHP / 297 TQ)

Owner: emdot Year: 1996 Model: Maxima Color: White Transmission: Manual 5-Speed Transmission Trim: SE Mod List: Engine and Transmission 2003 VQ35DE 3.0 Timing Components and Cam Adapters Vortech V2 Supercharger 3.33" Pulley (~9 PSI) Blitz BOV NWP VIAS Delete Plate RC 440cc Injectors Aeromotive A1000 Fuel Pressure Regulator WeaponR Fuel Rail Adapters Steel…

2016 8thgen Non-Bose Stereo Installation

     Posted on: 04/15/2021

2016 8thgen Non-Bose Stereo Installation

Member Credit: macdonjh I'll start with the reconnaissance I did in the front door. Several photos below: Front door: this is just a photo of the front door with the finisher removed. Front door speaker: a close-up shot of the 6"x9" factory speaker in the front door. It has a plastic…

2000-2003 5thgen Nissan Maxima In Cabin Micro Filter Replacement Procedure

     Posted on: 04/08/2021

2000-2003 5thgen Nissan Maxima In Cabin Micro Filter Replacement Procedure

Community Member Credit: carzoneautorepair These are the Nissan-Supplied instructions for the In-Cabin Microfilter. They are somewhat generic and were not 100% accurate to my car. The only difference was that my car did not have the “Glove Box Finisher”. Besides that, everything else was correct. Perhaps the Glove Box Finisher…

AdminTuning’s Turbo 6-Speed 5thgen Nissan Maxima Tuned (488WHP / 446TQ)

     Posted on: 03/06/2021

AdminTuning's Turbo 6-Speed 5thgen Nissan Maxima Tuned (488WHP / 446TQ)

Owner: Moncef aka AdminTuning Year: 2002 Model: Maxima Color: Tan Engine: Built VQ35DE (Built by epstuning) Transmission: 6-Speed Manual Videos Mod List: EPS Built Engine 8.8:1 Pistons Forged Rods ARP 625+ Head Studs ARP Main Studs BC S2 Cams RevUp Oil Pump Custom Fuel Return System with Walbro 450LPH Fuel Pump E85…

Redline Maxima’s 1998 5-Speed Supercharged 4thgen Nissan Maxima

     Posted on: 02/27/2021

Redline Maxima's 1998 5-Speed Supercharged 4thgen Nissan Maxima

Owner: Redline Maxima Year: 1996 Model: Maxima Color: Redline Red Paint (AX6 - 350z color) Engine: VQ30DE Transmission: 5-Speed Manual Mod List: Exterior: Redline Red Paint (AX6 - 350z color) Stillen Lip Kit 97 rear bumper Shaved door moldings on the side Shaved antenna, trunk (they forgot the keyhole) Shaved nozzles on hood…

How to Install Flush Mounted Voltmeter Installation on 5thgen Nissan Maxima

     Posted on: 02/24/2021

How to Install Flush Mounted Voltmeter Installation on 5thgen Nissan Maxima

Community Member Credit: AJ~ I love voltmeters. They tell you if the alternator died and you are running on the battery. Or in our case, the voltage regulator died and the car's electrical system was seeing 18.6VDC. Luckily, the ECU survived. All cars should have a voltmeter, and since El…

How to Remove ECU on 1995-1999 4thgen Nissan Maxima

     Posted on: 02/20/2021

How to Remove ECU on 1995-1999 4thgen Nissan Maxima

Community Member Credit: CS_AR Here's a slide show I pulled together this morning after I removed the ECU from my 99 Maxima. I read some ECU removal instructions and was able to remove the ECU in about 20 minutes or less. While I purchased a new Offset Ratchet Screwdriver Tool…

Jonathan’s 2002 Gen2 VQ35DE 6-Speed Swapped 5thgen Nissan Maxima

     Posted on: 01/04/2021

Jonathan's 2002 Gen2 VQ35DE 6-Speed Swapped 5thgen Nissan Maxima

Owner: Jonathan Johnson Year: 2002 Model: Maxima Color: Black Trim: SE Engine: Gen2 VQ35DE Transmission: 6-Speed Manual (Originally Automatic) Video: Mod List: 2010 Nissan Maxima Motor 6-Speed HLSD Transmission Haltech ECU & Haltech Wideband 4" Intake GTR Injectors Injectors 2j Racing Lightweight Flywheel Stage 2 Clutch Short Throw Shifter SS Clutch Line…

How to Install RedLineGoods Shift Boot on 1995-1999 4thgen Nissan Maxima

     Posted on: 12/27/2020

How to Install RedLineGoods Shift Boot on 1995-1999 4thgen Nissan Maxima

Credit: redlinegoods 1. Start by removing your Shift Console. 2. Pull the the rear of the shift console towards you and slightly lift. 3. Pull the console slowly until it separates from the lower portion of the radio. 4. Turn the shift knob counter clockwise to remove it. You will…

Josh’s 1998 Gen2 Full VQ35DE 6-Speed 4thgen Nissan Maxima

     Posted on: 12/24/2020

Josh's 1998 Gen2 Full VQ35DE 6-Speed 4thgen Nissan Maxima

Owner: Josh Go Hard Neal Year: 1998 Model: Maxima Color: White Trim: SE Engine: VQ35DE Full Swap (Not 3.0 Timing) Transmission: 6-Speed Manual Mod List: 2011 Maxima Motor 2002 Maxima 6 Speed HLSD 2002 ECU Stock Tuned 6th Gen Maxima True CAI Fidanza Lightweight Flywheel Nisformance Stage 2 Clutch Altima 3.5 Headers Custom Y-Pipe…

TheArtist’s 1995 VQ35DE 6-Speed Swapped 4thgen Nissan Maxima

     Posted on: 12/20/2020

TheArtist's 1995 VQ35DE 6-Speed Swapped 4thgen Nissan Maxima

Owner: TheArtist Year: 1995 Model: Maxima Color: Blue Trim: SE Engine: VQ35DE Transmission: 6-Speed Manual "I have owned this car since 2005 and it has treated me very well. Everything that has ever been done to the car was strictly done be me and me alone. I put a lot of heart and…

2013 Maxima Gen2 VQ35DE Swap on 3.0 Timing Tuned on 3.0 Stock ECU (291 WHP / 258 TQ)

     Posted on: 12/20/2020

2013 Maxima Gen2 VQ35DE Swap on 3.0 Timing Tuned on 3.0 Stock ECU (291 WHP / 258 TQ)

Owner: Roger McDonald Tuner: Moncef @ AdminTuning This is a very impressive setup. Especially for the Max enthusiasts that choose to go the 3.0 timing route.   Engine Mod List: 2013 Maxima Engine on 3.0 Timing (was previously 3.0 DE-K) 2016+ Maxima Upper Intake Manifold 2016+ Ported Lower Intake Manifold…

Ethan Dori’s 2002 305WHP 6-Speed Gen2 VQ35DE 5thgen Nissan Maxima

     Posted on: 12/19/2020

Ethan Dori's 2002 305WHP 6-Speed Gen2 VQ35DE 5thgen Nissan Maxima

Owner: Ethan Dori Year: 2002 Model: Maxima Color: Majestic Blue Trim: SE Engine: 2013 Gen2 VQ35DE Swap Transmission: 6-Speed Manual Mod List: 2013 Maxima Motor SPEC Stage 2 Clutch JWT Flywheel Cattman Headers 3.5" Full Cold Air Intake Billet Oil Pump ARP Rods Bolts Oil Cool Delete SS Clutch Line SS Fuel…

How to Install a Suprastick V4 on 4thgen Nissan Maxima (Automatic Transmission)

     Posted on: 12/19/2020

How to Install a Suprastick V4 on 4thgen Nissan Maxima (Automatic Transmission)

Community Member Credit: G4nismo The Suprastick manual can be downloaded here: SSv4.6 - Manual Tools Needed Wire stripper Wire taps Wire quick connectors (slide or bullet style) Soldering iron A lot of wires Additional Parts Needed: DB9 male to DB9 male serial cable (for LCD screen) Null modem adapter (for…

Cheap Lightweight Racing Battery from a Battery Jump Box

     Posted on: 12/18/2020

Cheap Lightweight Racing Battery from a Battery Jump Box

Community Member Credit: Aaron92SE First off, I just want to say that I got this idea from Jime. He purchased a 300amp battery jump box and used the battery out of it for his car. It weighed 6 lbs. I believe he had problems with it starting. So he purchased…

How to Make Idle Air Volume Relearn Stick on 5thgen Nissan Maxima

     Posted on: 12/17/2020

How to Make Idle Air Volume Relearn Stick on 5thgen Nissan Maxima

Community Member Credit: Thrillho In case you've disrupted your throttle body and need to perform the Idle Air Volume Relearn, you've probably noticed that it doesn't "stick" , meaning it worked fine for the time being and then it didn't. I am using the Nissan Data Scan app with an…