Search Results for: Ecm

Results 1 - 24 of 24Page 1 of 1
Results per-page: 10 | 20 | 50 | 100

1998 4thgen Nissan Maxima Alarm, Remote Start, Keyless Entry Wiring

     Posted on: 01/01/2021

1998 4thgen Nissan Maxima Alarm, Remote Start, Keyless Entry Wiring

Credit: the12volt Constant 12V+ White/Red or White/Purple Ignition Switch Harness Starter Black/Yellow or Black/White Ignition Switch Harness Ignition Black/White or Black/Red Ignition Switch Harness Ignition 2 Starter 2 Wire Red/Yellow or Red Ignition Switch Harness Accessory Blue or White/Blue Ignition Switch Harness Tach White/Green ECM, Front of Center Console Neutral…

How to Install a Suprastick V4 on 4thgen Nissan Maxima (Automatic Transmission)

     Posted on: 12/19/2020

How to Install a Suprastick V4 on 4thgen Nissan Maxima (Automatic Transmission)

Community Member Credit: G4nismo The Suprastick manual can be downloaded here: SSv4.6 - Manual Tools Needed Wire stripper Wire taps Wire quick connectors (slide or bullet style) Soldering iron A lot of wires Additional Parts Needed: DB9 male to DB9 male serial cable (for LCD screen) Null modem adapter (for…

How to Get Rid of The Door Chime on 5thgen Nissan Maxima

     Posted on: 12/11/2020

How to Get Rid of The Door Chime on 5thgen Nissan Maxima

Community Member Credit: phi11yphan Hi, everyone. First time site post, long time reader. I still love my '02 Maxima SE, 6-speed manual! Thanks to everyone for all your stories, advice, and wisdom. I read the above suggestions, but chose an alternate sound/chime/buzzer/speaker solution. My option took me less than an…

Infiniti I35 / 5thgen Nissan Maxima No Start Condition Due to Lock Mode (FIX INSIDE)

     Posted on: 10/20/2020

Infiniti I35 / 5thgen Nissan Maxima No Start Condition Due to Lock Mode (FIX INSIDE)

LOCK MODE FUNCTION When the starting operation is carried out five or more times consecutively under the following conditions, IVIS (NATS) will shift the mode to one which prevents the engine from being started. - Unregistered ignition key is used. - IMMU or ECM’s malfunctioning. ESCAPE FROM LOCK MODE 1.…

5thgen Nissan Maxima Heated Side Mirror Installation

     Posted on: 05/17/2020

5thgen Nissan Maxima Heated Side Mirror Installation

Credit: Fezzik (David Honey) This is the How To on the installation of heated mirrors. A few things first before I go on. I have the automatic climate control with the rear window defogger switch on it. The side view mirrors are linked to this switch. For those with manual…

Preventing ECU Failures in 5thgen Nissan Maxima

     Posted on: 11/10/2019

Preventing ECU Failures in 5thgen Nissan Maxima

Member Credit: maxiiiboy (Vol.4, Spring 2017) Summary The 5th Generation Maxima is a very reliable car - if you know how to maintain it. The problem is that the car suffers from a few design defects that can make it expensive to maintain. For example, a worn-out engine mount may…

P0075 – Intake Valve Control Solenoid Circuit (Bank 1) 2009 Maxima

     Posted on: 09/02/2019

P0075 - Intake Valve Control Solenoid Circuit (Bank 1) 2009 Maxima

Member Credit: EddyMaxx Our 2009 7thgen Nissan Maxima threw code P0075 - Intake Valve Control Solenoid Circuit (Bank 1). Bank 1 is the location closest to the Firewall. The first thing to always do is to check the connectors and harness to see if it's broken or has any exposed…

1999 to 1995 4thgen Maxima ECM Swap a Success!

     Posted on: 07/07/2018

1999 to 1995 4thgen Maxima ECM Swap a Success!

Member Credit: whlimi I was running a cali spec ECM in my 3.5 swapped 99. I had 14 codes, most of them emissions related (damn cali spec) and TCM codes (running SSV4). Got myself a 95 5spd ECM from the junk yard and decided I would take the plunge and swap…

Nissan Maxima 04-06 / Altima SE-R 05-06 EGR Delete (10K Ohm Resistor)

     Posted on: 06/03/2018

Nissan Maxima 04-06 / Altima SE-R 05-06 EGR Delete (10K Ohm Resistor)

Member Credit: Fuzzyknub / EddyMaxx If you eliminate your EGR valve, you'll likely get a P0400 Exhaust Gas Recirculation Flow Malfunction trouble code. But no worries, here's what you need to do to get rid of the code. EGR (What you will be eliminating/deleting) 1. EGR Block-off Plate Buy the EGR blockoff plate…

P1610 NISSAN – Lock Mode (5thgen Maxima Won’t Start)

     Posted on: 02/11/2018

P1610 NISSAN - Lock Mode (5thgen Maxima Won't Start)

This seems to be common on the 2002-2003 Nissan Maxima's. Below is a procedure you can follow before going to the dealer. Possible causes: Faulty or not programmed ignition key Faulty IMMU Faulty Engine Control Module (ECM) This code is usually triggered when a not registered or damaged key is…

No Start or Start and Stall on 4thgen Maxima (P0340)

     Posted on: 02/10/2018

No Start or Start and Stall on 4thgen Maxima (P0340)

Member Credit: Sparky This 1997 Nissan Maxima was towed in from another shop after unsuccessful repair attempts. I am not sure how many shops it has been to. Tried to crank vehicle, it spit and coughed and jumped and carried on but I managed to get it to fire a…

Tom Perdue’s aka t6378tp Turbo 4thgen Maxima

     Posted on: 01/03/2018

Tom Perdue's aka t6378tp Turbo 4thgen Maxima

Member Credit: Thomas Perdue aka t6378tp Ok so I figured it was about that time to start a build thread. I have enough pic's to keep the thread going for awhile so here we go. I grabbed a 5spd 4gen from a local member for $500.00 with a stillen exhaust, sts,…

How to Install O2 Simulators on Nissan Maxima

     Posted on: 01/01/2018

How to Install O2 Simulators on Nissan Maxima

Member Credit: Puppetmaster This should work on all Cali spec Maximas. When dealing with codes P0420 and P0430, whether its voluntary removal of or just bad pre-cats, the O2 sim helps keep your SES/CEL/MIL light off and typically also prevents the ECU from storing any related codes. Rear 02 sensors…

Nissan DataScan II aka The Affordable Nissan Consult

     Posted on: 10/09/2017

Nissan DataScan II aka The Affordable Nissan Consult

If you are DIY person and love working on your Nissan Maxima, then this tool is a MUST HAVE! When you go to the Nissan dealer, the person working on your car typically uses a tool called a Nissan Consult. The Nissan Consult that the dealer uses costs thousand of…

July 29th, 2017 – 5th Annual East Coast Maxima (ECM) Event

     Posted on: 07/30/2017

July 29th, 2017 - 5th Annual East Coast Maxima (ECM) Event

Photo Credits: Raymond Anthony, Philly Rillin, Kairon Coley, Ray Love, Lauren Jackson, Mike Rios, Eddy, Nikky Nixmax, Donavin Pearson, Lauren Jackson, Manny Brea https://www.youtube.com/watch?v=GWJ2Dm5v8U0  

Event Rules & Details

     Posted on: 02/08/2017

Event Rules & Details

Due to safety measures and New York State  COVID-19 large gathering rules, all #ECM events will be canceled until further notice.  PARK ADDRESS: FDR State Park 2957 Crompond Road Yorktown Heights, NY 10598 PARK RULES: There will be ZERO tolerance breaking any of the rules. You will be asked to…