Search results for "350z"

Results 1 - 30 of 71Page 1 of 3
Sorted by: Relevance | Sort by: DateResults per-page: 10 | 20 | 50 | All

VQ35DE RWD 350z vs FWD Maxima Lower Intake Manifold Comparison

Side View 350Z on the right. Both are the same height. Top View 350Z on the Bottom. The next two pics are meant to show how much more of a straight thru shot that the flow path is in the 350Z LIM. The first one is the FWD Maxima LIM…
Read more » VQ35DE RWD 350z vs FWD Maxima Lower Intake Manifold Comparison

2002 Nissan Maxima with 350z Heated & Power Seats

Member Credit: Paul Hallquist aka nicelowz Some of you may have seen this in a few other Maxima groups. I did a 350Z heated and power seat swap into my 2002 Maxima. I used the 350z seat rails and all. I cut the 350z mounts from the rails and bolted the rails…
Read more » 2002 Nissan Maxima with 350z Heated & Power Seats

VQ35DE 350Z G35 Billet T6061 Aluminum Fuel Rails w/ Fittings (Fits 2002-2008 Nissan Maxima)

Our 350z Fuel Rails are machined from billet T6061 Aluminum stock. The rail has a larger bore diameter than stock, allowing fuel flow to increase 350% more over stock (as seen above). The rail comes clear anodized to help protect against the elements. The rail is tapped to accept dash…
Read more » VQ35DE 350Z G35 Billet T6061 Aluminum Fuel Rails w/ Fittings (Fits 2002-2008 Nissan Maxima)

RWD 350z Intake Manifold Installed on FWD VQ35DE Nissan Maxima

Community Member Credit: Nismo3112 / vsamoylov Important Notes: You will need the front valve cover from a 350z and modify the plenum to clear the hood. The FWD fwd valve cover on the driver's side won't work cause of the oil plug. The Front Strut Bar does fit You can use…
Read more » RWD 350z Intake Manifold Installed on FWD VQ35DE Nissan Maxima

350z Clutch Installed on 6-Speed 5thgen Nissan Maxima (2002-2003)

Member Credit: DaBoxSE So my buddy and I did and overhaul last week on my car...I finally replaced my grinding transmission, rear main seal and replaced the Clutch. I wanted to put in something better than the stock maxima clutch because I thought it would be pretty weak. Also because…
Read more » 350z Clutch Installed on 6-Speed 5thgen Nissan Maxima (2002-2003)

350z RWD Manifold Installed on 5thgen Nissan Maxima VQ35DE Engine

Community Member Credit: tcb_02_max If you are familiar with the RWD IM, you'll notice right away that the elbow on mine has been cut/modified. Different people have added a 350Z IM in different ways, which you can read about ("see") here: My project consisted of the following: 3/4" engine +…
Read more » 350z RWD Manifold Installed on 5thgen Nissan Maxima VQ35DE Engine

Upgrading to G35/350z Dual Piston Brakes and 12.6″ Rotors

Member Credit: Aackshun Caliper Models: G35 Coupe and Sedan 2005, 2006, 2007 (Coupe only for '07) and Non-Brembo Equipped 350z 2006, 2007 and 2008 models. How to Applies to the Following Vehicles: -J30 (89-94) Maxima -A32 (95-99) Maxima -A33 / A33B (2000-2003) Maxima -A34 (2004-2008) Maxima -L31 (2002-2006) Altima Maybe…
Read more » Upgrading to G35/350z Dual Piston Brakes and 12.6″ Rotors

Brembo BBK Installed on 2016 8thgen Nissan Maxima

Member Credit: Mikkellucci I purchased the Akebono calipers, pads, etc. However, I just couldn’t go thru with adding that much unnecessary rotor weight to my car. And I’m talking about the Z1 “light weight” 2 piece ($1300) front and rear rotors. Even those add a ton of F/R weight because…
Read more » Brembo BBK Installed on 2016 8thgen Nissan Maxima

Nissan 350z/370z Wheel and Tire Setups for 5thgen Nissan Maxima

Below are the factory rim and tire specifications for Nissan 350z/370z models which are commonly installed on the 5thgen Nissan Maxima. 350z Touring V2 Front Wheels: 18x8 +30MM Front Tires: 225/45/18 Weight: 24.4lbs Rear Wheels: 18x8.5 +33MM Rear Wheels: 245/45/18 Weight: 25.8lbs 370z Base: Front Wheels: 18x8 +43MM Front Tires:…
Read more » Nissan 350z/370z Wheel and Tire Setups for 5thgen Nissan Maxima

350z Seats Installed into 5thgen Nissan Maxima – Reference Information

The track width between the 350z and Maxima was the exact same and was key to making this swap work. Also viable, using a seat from a B15 Sentra (00-06) - as these are a direct swap with 5/5.5 Max seats. Also, this guide is only if you have 2…
Read more » 350z Seats Installed into 5thgen Nissan Maxima – Reference Information

Platinum Auto Works VQ35DE 6-Speed Supercharged 4thgen Maxima

Owner: Matt Carey Year: 1996 Model: Maxima Color: Black Transmission: 6-Speed HSLD Trim: GXE What motivated you to MOD your Maxima? Wanted to push it to the limits and have the freshest cleanest Maxima out there. - Matt Carey Full Mod List / Specs: VQ35DE Motor Swap Vortech V2 supercharger HSLD…
Read more » Platinum Auto Works VQ35DE 6-Speed Supercharged 4thgen Maxima

350z Lightweight Alternator Pulley Fitment on 3.5 Maxima’s

Member Credit: Shaquille Keon Jenkins & Philly Rillin‎ The 350z lightweight alternator pulley fits VQ35 Maxima's. Same exact size. Its a little thick in the middle so the nut doesnt thread all the way in but with red loctite and an impact gun does the trick. Best part of all,…
Read more » 350z Lightweight Alternator Pulley Fitment on 3.5 Maxima’s

Autosports Engineering vs eBay 300zx Caliper Adapters for Akebono Calipers

Credit: Jose R Garcia Colon & Robert Mandru UPDATE from Robert Mandru: Have both the 300zx and 350z bracket adapters. They will NOT clear with Evo X 2 piece rotors, maybe just 1 piece. Even with one piece it still wouldn't clear the inside, rotor too large with the 350z/G35…
Read more » Autosports Engineering vs eBay 300zx Caliper Adapters for Akebono Calipers

Redline Maxima’s 1998 5-Speed Supercharged 4thgen Nissan Maxima

Owner: Redline Maxima Year: 1996 Model: Maxima Color: Redline Red Paint (AX6 - 350z color) Engine: VQ30DE Transmission: 5-Speed Manual Mod List: Exterior: Redline Red Paint (AX6 - 350z color) Stillen Lip Kit 97 rear bumper Shaved door moldings on the side Shaved antenna, trunk (they forgot the keyhole) Shaved nozzles on hood…
Read more » Redline Maxima’s 1998 5-Speed Supercharged 4thgen Nissan Maxima

1995-1999 4thgen MAF Upgrade to 350z/370z/GTR or Newer Nissan Maxima MAF (Mass Airflow Sensor)

Community Member Credit: ViperVadim / Eddy This will allow you to use a newer Mass Airflow Sensor to your 1995-1999 Nissan Maxima.  This upgrade has been available for many years in the Maxima community. The newer MAF sensor is pretty much the same as 90% of the newer Nissan Models.…
Read more » 1995-1999 4thgen MAF Upgrade to 350z/370z/GTR or Newer Nissan Maxima MAF (Mass Airflow Sensor)

2000-2001 5thgen MAF Upgrade to 350z/370z/GTR or Newer Nissan Maxima MAF (Mass Airflow Sensor)

Community Member Credit: ViperVadim / Eddy This will allow you to use a newer Mass Airflow Sensor to your 2000-2001 Nissan Maxima.  This upgrade has been available for many years in the Maxima community. The newer MAF sensor is pretty much the same as 90% of the newer Nissan Models.…
Read more » 2000-2001 5thgen MAF Upgrade to 350z/370z/GTR or Newer Nissan Maxima MAF (Mass Airflow Sensor)

2002-2003 5thgen MAF Upgrade to 350z/370z/GTR or Newer Nissan Maxima MAF (Mass Airflow Sensor)

Community Member Credit: ViperVadim / Eddy This will allow you to use a newer Mass Airflow Sensor to your 2002-2003 Nissan Maxima.  This upgrade has been available for many years in the Maxima community. The newer MAF sensor is pretty much the same as 90% of the newer Nissan Models.…
Read more » 2002-2003 5thgen MAF Upgrade to 350z/370z/GTR or Newer Nissan Maxima MAF (Mass Airflow Sensor)

Installation of JDM 350Z Steering Wheel on 6thgen Maxima

Member Credit: DeusExMaxima There comes a time in a man's life when you sometimes have to just say . . .what the f<>k. The Maxima steering wheel is a nice but conservative item, which is styled towards the luxury side of its split personality (sport and luxury). My car explores the…
Read more » Installation of JDM 350Z Steering Wheel on 6thgen Maxima

FWD vs RWD VQ35DE Differences

Member Credit: pmohr To try to cut down on the 'can I use a 350z motor in my car', or 'why can't I use a G35 or FX35 or (etc) motor for my swap?' type of questions. The following pictures all have the blocks aligned in basically the same exact way…

5thgen Nissan Maxima with 350Z Custom Carbon Fiber Bumper Vent Duct

Community Member Credit: Jerry Herrera Description: Bumper Carbon Fiber Air Vent Intake Duct Left Driver For Nissan 350Z Z33 2003-09 Price: $38.70 Shipped eBay Order Link: https://www.ebay.com/itm/193269721728 Installation Pics Duct Vent Photos  
Read more » 5thgen Nissan Maxima with 350Z Custom Carbon Fiber Bumper Vent Duct

300ZX Z32 Caliper Setup Options for 5thgen Nissan Maxima

Blehmco Kit: Z32 Calipers 2004 6thgen Maxima Rotors Relocation brackets Conversion Lines Jeff92se Kit: z32 calipers Cobra rotors relocation brackets center rings conversion lines Z32 Direct Rotor Swap: Z32 calipers Z32 rotors (must be milled down) conversion lines. Additional Info: You have to mill down the diameter of the rotor,…
Read more » 300ZX Z32 Caliper Setup Options for 5thgen Nissan Maxima

How to Replace Rack And Pinion Bushings on 2004-2008 6thgen Nissan Maxima

Member Credit: Mike2005 Nissan no longer lists this bushing however, the 03-08 350z bushing is available and is an exact fit. Part # 54445-4P000. I did this after installing my headers with the Y-pipe removed. Time 1-2 hrs Tools Needed. 1. Jack and Jack Stands. 2. You will need 2…
Read more » How to Replace Rack And Pinion Bushings on 2004-2008 6thgen Nissan Maxima

How To Install 350Z/G35 Rear Camber Arms

Member Credit: officerfrasher Items needed: 350Z/G35 Rear Camber Arms (I bought the Ichiba ones. There are cheaper ones, but they don't look as strong. Here's a link for the Ichiba ones on eBay WD-40, Liquid Wrench, etc. 17mm socket and/or wrench (my impact gun made it real easy, but it…

Helpful Install Information on the Various Types of eBay Headers

When Maxima owners get the infamous P0420 check engine light code for bad pre-cats, the best route is to go with eBay headers. However, when you search eBay there are various types of header listings that pop-up. This post goes into a little more details about what modification are required…
Read more » Helpful Install Information on the Various Types of eBay Headers

2013 Maxima Gen2 VQ35DE Swap on 3.0 Timing Tuned on 3.0 Stock ECU (291 WHP / 258 TQ)

Owner: Roger McDonald Tuner: Moncef @ AdminTuning This is a very impressive setup. Especially for the Max enthusiasts that choose to go the 3.0 timing route.   Engine Mod List: 2013 Maxima Engine on 3.0 Timing (was previously 3.0 DE-K) 2016+ Maxima Upper Intake Manifold 2016+ Ported Lower Intake Manifold…
Read more » 2013 Maxima Gen2 VQ35DE Swap on 3.0 Timing Tuned on 3.0 Stock ECU (291 WHP / 258 TQ)

Joey Edwin’s Gen2 VQ35DE 6-Speed Swapped 5thgen Nissan Maxima

Owner: Joey Edwin Year: 2003 Model: Maxima Current Color: White Transmission: Automatic to 6-Speed Manual HLSD Conversion Trim: SE Joey is a high-school 17-year-old true passionate Nissan Maxima enthusiast. He works on his own car and built it with his uncle CJ. He shares his progress with the community. Mod List: 2014 Gen2…
Read more » Joey Edwin’s Gen2 VQ35DE 6-Speed Swapped 5thgen Nissan Maxima

2002-2003 5thgen Nissan Maxima OEM Mass Airflow (MAF) Replacement MAF0095 <$100 Bucks

Community  Member Credit: Eddy Wanted to make this reference post for folks that have MAF (Mass Airflow) issues and want to get an cost effective OEM replacement. I have to give credit to TallTom who gave me the idea to try this out. There are various aftermarket options out there…
Read more » 2002-2003 5thgen Nissan Maxima OEM Mass Airflow (MAF) Replacement MAF0095 <$100 Bucks

98MaXedOut’s Supercharged VQ35DE 4thgen Maxima (418WHP /404TQ)

Owner: Steve Fernandez aka 98MaXedOut Year: 1997 Model: Maxima Color:  White Transmission: 5-Speed Manual Trim: SE Mod List: 2003 Modded VQ35 with 3.0 timing 5-Speed Transmission w/ LSD ARP Rod bolts ARP Main Bolts ARP Head studs 350z Revup Cams PnP LIM HR Valve Springs and retainers double shimmed (can safely rev to 8k) Revup Oil…
Read more » 98MaXedOut’s Supercharged VQ35DE 4thgen Maxima (418WHP /404TQ)